I2C Data Capture Dumps
- Evaluation board DMP initialization and usage (Jeff Rowberg, 8/15/2011)
- MotionFit SDK board 9DOF DMP initialization and usage (Jeff Rowberg, 2/23/2012)
- test (Anonymous, 3/24/2012)
- Azoteq IQS158 initialization and touch (Anonymous, 5/30/2012)
- MPU-6050 DMP example Arduino Sketch (Anonymous, 5/30/2012)
- Azoteq IQS156 initialization and touch (Anonymous, 6/5/2012)
- Test Arduino MotionFit DMP output (Anonymous, 6/9/2012)
- Test Arduino MotionFit DMP output (FIFO failure) (Anonymous, 6/9/2012)
- MotionFit DMP AUX line traffic (Anonymous, 6/9/2012)
- MotionFit DMP MST line traffic (Anonymous, 6/10/2012)
- test (Anonymous, 7/26/2012)
- Non-Arduino MPU-6050 DMP (Not Working) (Anonymous, 8/25/2012)
- Non-Arduino MPU-6050 DMP (Not Working) (Anonymous, 8/25/2012)
- DMP Fifo Always Empty (Anonymous, 8/25/2012)
- DMP Fifo still empty (Anonymous, 8/25/2012)
- MPU-6050 FIFO Processing (Anonymous, 8/26/2012)
- DMP Working (After Reset) (Anonymous, 8/31/2012)
- More Startup Oddness (Anonymous, 8/31/2012)
- DMP FIFO Failure with Register Dumps (Anonymous, 8/31/2012)
- MotionFit SDKv4.1 dump1 (Anonymous, 11/14/2012)
- MotionFit SDKv4.1 dump1_redo (Anonymous, 11/14/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (Anonymous, 11/21/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (smaller dump) (Anonymous, 11/21/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (corrected dump format) (Anonymous, 11/22/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (re-capture after enabling I2C analyzer) (Anonymous, 11/24/2012)
- MPU-9150 raw output (Anonymous, 11/24/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (re-capture after apparent Logic formatting bug) (Anonymous, 11/25/2012)
- MPU6050_DMP6 sketch using MPU-9150 eval board (Anonymous, 11/26/2012)
- MPU-9150 DMP debug #1 (Anonymous, 11/27/2012)
- MotionFit SDKv5.1_dump1 (Anonymous, 11/29/2012)
- MPU-9150 DMP debug #2 on Arduino Duemilanove (Anonymous, 12/1/2012)
- MPU-9150 DMP debug #2 on Arduino Nano (Anonymous, 12/1/2012)
- MPU-6050 DMP6 sketch, no output while waiting for first interrupt (Anonymous, 1/9/2013)
- Test (Anonymous, 2/4/2013)
- qwereqw (Anonymous, 2/4/2013)
- Test (Anonymous, 2/4/2013)
- lcd (Anonymous, 2/12/2013)
- GPS sensor test (Anonymous, 3/13/2013)
- MPU6050 Init Test (Anonymous, 4/2/2013)
- WiiMote Startup (Anonymous, 4/5/2013)
- DENE2 (Anonymous, 4/8/2013)
- dene3 (Anonymous, 4/8/2013)
- dene3 (Anonymous, 4/8/2013)
- dene4 (Anonymous, 4/8/2013)
- 6050 Invensense code (Anonymous, 5/28/2013)
- 6050 Invensense code (Anonymous, 5/28/2013)
- 9150 Invensense code (Anonymous, 5/28/2013)
- 9150 invensense code (Anonymous, 5/28/2013)
- 9150 Invensense (Anonymous, 5/28/2013)
- 6050 (Anonymous, 5/28/2013)
- TC74A0 (Anonymous, 6/13/2013)
- test (Anonymous, 8/12/2013)
- test (Anonymous, 8/12/2013)
- debugging init (Anonymous, 8/15/2013)
- debug (Anonymous, 8/17/2013)
- debug2 (Anonymous, 8/19/2013)
- debug3 (Anonymous, 8/19/2013)
- test (Anonymous, 8/19/2013)
- k1 (Anonymous, 8/24/2013)
- L1 (Anonymous, 8/24/2013)
- K1b (Anonymous, 8/24/2013)
- K1c (Anonymous, 8/25/2013)
- MPU 9150 (Anonymous, 9/3/2013)
- MPU9150 I2C DATA_4 (Anonymous, 9/3/2013)
- MPU9150 I2C DATA_4 as 6050 (Anonymous, 9/3/2013)
- DCC-CI session (Anonymous, 2/11/2014)
- DDC-CI Session (BlueEye staurtup) (Anonymous, 2/11/2014)
- DDC-CI Calibration (Anonymous, 2/11/2014)
- test1 (Anonymous, 3/5/2014)
- TM1000+GPS (Anonymous, 4/16/2014)
- TM1000+GPS (Anonymous, 4/16/2014)
- TM1000 + AQ6 (Anonymous, 4/16/2014)
- TM1000 AQ6 Rev01 (Anonymous, 4/16/2014)
- TM1000 + GPS -- timer running (Anonymous, 4/16/2014)
- test (Anonymous, 5/15/2014)
- MPU6050 DMP + Quat Read (Anonymous, 6/4/2014)
- MPU6050 correct decode + dmp (Anonymous, 6/4/2014)
- dmptest-otpfail (Anonymous, 8/20/2014)
- DMP OTP fail (Anonymous, 8/20/2014)
- dmptest2 (Anonymous, 8/20/2014)
- Mot/ZMot interrupt test (Anonymous, 9/1/2014)
- Mot/ZMot test 2 (Anonymous, 9/1/2014)
- Mot/ZMot test 3 (Anonymous, 9/1/2014)
- Arduino DMP (Anonymous, 7/14/2020)
Upload New I2C Data Capture Dump
This is a work in progress; there is no suitable login feature yet, so all uploads are anonymous and public. This will be fixed before too much longer, so if you'd like, just contact me to let me know that a particular new dump belongs to you, and when user accounts are setup, I'll be happy to associate your dumps with your user.
Also, I plan to add support for dump formats other than Saleae I2C CSV exports. Most notably, I have basic support for exports from the OpenBench Logic Sniffer, but it is untested. If you have any of these dumps, please upload them and let me know so I can test and finish this feature.