arvindsanjeev Posted November 26, 2013 Report Share Posted November 26, 2013 Hello, Thanks for the awesome work on the MPU60X0 series Mr.Jeff. I am having some trouble on using this : http://www.ebay.com/itm/NEW-MPU-6050-Module-3-Axis-Gyroscope-Accelerometer-Module-for-Arduino-MPU-6050-/170881535422 with an arduino uno. I wired up the sda, scl, vcc ,gnd and INT pins to arduino. The raw sketch in the examples works fine with relatively changing values with respect to the mpu, however when i try to run the DMP sketch from the examples (for ypr), I get random values ( all sorts from -ve to +ve extremes). Please help , what might be going wrong? Like this: ypr -87.13 44.97 1.53 ypr 1.48 -12.48 9.21 ypr -165.70 2.07 -43.67 FIFO overflow! ypr 161.94 -23.04 6.82 ypr -112.91 22.77 -66.79 ypr 63.09 67.35 20.87 ypr -0.02 0.03 -0.02 ypr 96.41 -65.82 -23.38 ypr -173.59 -11.67 55.13 ypr -179.77 -25.37 4.16 ypr 34.97 -52.92 21.85 ypr 176.46 24.11 -0.73 ypr -47.54 18.19 -69.33 ypr -40.63 8.71 -22.80 ypr 180.00 -0.25 0.13 ypr -42.68 -54.78 29.34 ypr -0.46 13.73 -10.30 ypr -165.67 2.11 -43.72 ypr 13.93 3.98 81.43 ypr -0.02 -0.03 3.53 ypr 33.11 -0.77 70.05 ypr -9.67 -21.45 -66.33 ypr 180.00 0.22 -19.05 ypr 84.95 29.47 49.47 ypr 162.55 -22.88 6.86 ypr -114.71 -21.13 68.85 ypr -43.29 -77.13 -5.42 ypr -0.02 0.03 -0.02 ypr 10.51 42.09 -34.33 ypr 20.90 2.08 64.16 ypr -179.78 -25.30 3.98 ypr -98.58 -6.70 -69.35 ypr 176.27 23.92 -0.76 ypr 43.45 86.87 -1.40 Quote Link to comment Share on other sites More sharing options...
luisrodenas Posted December 17, 2013 Report Share Posted December 17, 2013 May be a calibration issue? Check this topic: http://www.i2cdevlib.com/forums/topic/91-how-to-decide-gyro-and-accelerometer-offsett/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.