Jump to content
I2Cdevlib Forums

Joachim

Members
  • Posts

    2
  • Joined

  • Last visited

Joachim's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi Jeff, I finally got something that is somewhat stable and not a complete mess Has you suggested it, I rewrote the 4 'main' functions. The MCU class has been design to be use as an object. Some function use variables declared in the constructor (peripheral clock frequency for example). That's not the best option, I ll change that to use the functions as static. You are welcome to use it, upgrade it, criticize it, delete it, ... (I hope not the last one... The I2C communication still has to be made more reliable. I tried to put the bases for a good error management system but the actual error management algorithm still has to be ... well ... created For the moment, your I2Cdev class call a first function where the error management algorithm still has to be implemented. That first function call a second one where the actual read/write is done and return with an error_code. The error_code list can be found in the UART1PrintERR function. My "Read" functions do not return the actual length yet but the DataSize parameter instead. (To Be Completed) Below you ll find the following files: - I2Cdev.cpp - MCU.h - MCU.cpp - ACU.cpp (the main file for test purposes) - MPU6050.h - MPU6050.cpp (just the new functions) Here is the changes in your I2Cdev.cpp : int8_t I2Cdev::readWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t length, uint16_t *data, uint16_t timeout) { return pACU->I2CReadWords(I2C_MODULE_ID, devAddr, regAddr, data, length); } int8_t I2Cdev::readBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t *data, uint16_t timeout) { return pACU->I2CReadBytes(I2C_MODULE_ID, devAddr, regAddr, data, length); } bool I2Cdev::writeWord(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t data) { return writeWords(I2C_MODULE_ID, devAddr, regAddr, 1, &data); } bool I2Cdev::writeBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t* data) { return pACU->I2CWriteBytes(I2C_MODULE_ID, devAddr, regAddr, data, length); } My MCU.h : #include <plib.h> #include <p32xxxx.h> #include <stdint.h> #include <math.h> #include <helper_3dmath.h> #define RESET_DELAY 1000 #define TIMEOUT_DELAY 1000 #define NB_RETRY 2 #define UART1RXpin 0b0001 // pin RPB6 #define UART1TXpin RPB7R // pin RPB7 #ifndef MCU_H #define MCU_H class MCU { public: MCU(uint32_t SYSCLK, uint32_t PBCLK); void UART1Setup(uint32_t BAUD); void UART1Send(const char *data); uint8_t UART1Read(); void UART1PrintERR(uint8_t a); void UART1PrintQuaternion(Quaternion *Q); void UART1Teapot(uint8_t *buffer8); void UART2Setup(uint32_t BAUD); void UART2Send(const char *data); uint8_t UART2Read(); void UART2PrintERR(uint8_t a); uint8_t I2CSetup(I2C_MODULE I2C_MODULE_ID, uint32_t I2C_CLK_FREQ); uint8_t I2CDeviceReady(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr); uint8_t I2CWriteBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataTX, uint8_t DataSize); uint8_t I2CWriteWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataTX, uint8_t DataSize); uint8_t I2CReadBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataRX, uint8_t DataSize); uint8_t I2CReadWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataRX, uint8_t DataSize); uint32_t getPBCLK(); uint32_t getSYSCLK(); void ADCSetup(); void PWMSetup(); void INTSetup(); void TimerSetup(); void wait(uint32_t i); private: uint32_t PBCLK; uint32_t SYSCLK; uint8_t StartTransfer(I2C_MODULE I2C_MODULE_ID, BOOL restart ); uint8_t TransmitOneByte(I2C_MODULE I2C_MODULE_ID, uint8_t data ); uint8_t StopTransfer( I2C_MODULE I2C_MODULE_ID ); uint8_t I2CwriteBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataTX, uint8_t DataSize); uint8_t I2CwriteWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataTX, uint8_t DataSize); uint8_t I2CreadBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataRX, uint8_t *DataSize); uint8_t I2CreadWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataRX, uint8_t *DataSize); uint8_t I2CReset(I2C_MODULE I2C_MODULE_ID, uint8_t error_code); }; #endif /* MCU_H */ My MCU.cpp : #include <MCU.h> MCU::MCU(uint32_t pSYSCLK, uint32_t pPBCLK) { SYSCLK = pSYSCLK; PBCLK = pPBCLK; } ///////////////////////////////////////////////////////////////////////////////////// //////////// PUBLIC FUNCTIONS ///////////////////////////////////////////////////////////////////////////////////// // Not implemented. Just disabling ADC for now void MCU::ADCSetup() { AD1CON1bits.ON = 0; } // Not implemented. void MCU::PWMSetup() { } // Not implemented. Just disabling interrupt for now void MCU::INTSetup() { IEC1bits.I2C1MIE = 0; IEC1bits.I2C1SIE = 0; IEC1bits.I2C1BIE = 0; } // Not implemented. void MCU::TimerSetup() { } // All UART function use the legacy peripheral library from Microchip. // To be upgraded to use the current library for compatibility in the future. void MCU::UART1Setup(uint32_t BAUD) { U1RXR = UART1RXpin; // set RX and TX pin UART1TXpin = 0b0001; // OpenUART1(UART_EN|UART_BRGH_FOUR, UART_RX_ENABLE | UART_TX_ENABLE, PBCLK / (4 * BAUD) - 1); } // UART2 to be completed /* void MCU::UART2Setup(uint32_t BAUD) { U2RXR = 0b0001; // U1RX to RPB6 RPB7R = 0b0001; // U1TX to RPB7 OpenUART1(UART_EN|UART_BRGH_FOUR, UART_RX_ENABLE | UART_TX_ENABLE, PBCLK / (4 * BAUD) - 1); } void MCU::UART2Send(char data) { } char MCU::UART2Read() { } */ // Configure PIC32 register for I2C operation using Microchip peripheral library // This function required the variable 'PBCLK' which is set in the constructor ... uint8_t MCU::I2CSetup(I2C_MODULE I2C_MODULE_ID, uint32_t I2C_CLK_FREQ) { uint8_t error_code=0; I2CEnable(I2C_MODULE_ID, FALSE); I2CConfigure(I2C1, I2C_ENABLE_SLAVE_CLOCK_STRETCHING); if(I2C_CLK_FREQ == 400000) I2CConfigure(I2C1, I2C_ENABLE_HIGH_SPEED); uint32_t actualClock = I2CSetFrequency(I2C_MODULE_ID, PBCLK, I2C_CLK_FREQ); if ( abs((long int)(actualClock-I2C_CLK_FREQ)) > (long int)(I2C_CLK_FREQ/10) ) { DBPRINTF("Error: I2C1 clock frequency (%u) error exceeds 10%%.\n", (unsigned)actualClock); error_code=1; // return error_code; } // Enable the I2C bus I2CEnable(I2C_MODULE_ID, TRUE); return error_code; } void MCU::UART1Send(const char *data) { // putsUARTx take a String as parameter (with '\n' at the end) // putcUARTx send just one char putsUART1(data); } /* uint8_t MCU::UART1Read() { } */ // Here you can find the reference table for error code void MCU::UART1PrintERR(uint8_t error_code) { switch(error_code) { case 0: putsUART1("Error_code 0"); break; case 1: putsUART1("Error: I2C clock frequency exceeds limit. I2C not started"); break; case 2: putsUART1("Error: Sent byte was NACK"); break; case 3: putsUART1("Error: Bus collision during transfer (re)start"); break; case 4: putsUART1("Error: I2C Hangs on Idle"); break; case 5: putsUART1("Error: I2C transmitter not ready"); break; case 6: putsUART1("Error: I2C Master Bus collision during transfer"); break; case 7: putsUART1("Error: I2C hangs during transmission"); break; case 8: putsUART1("Error: I2C unable to stop transmission"); break; case 9: putsUART1("Error: I2C Receiver overflow"); break; case 10: putsUART1("Error: Slave reply has timed out !"); break; case 11: putsUART1("Error: I2CReadBytes exited when sending (N)ACK"); break; case 12: putsUART1("Error: I2C length parameter = 0"); break; default : putsUART1("Erreur inconnue"); break; } putsUART1("\n"); } // not tested yet void MCU::UART1PrintQuaternion(Quaternion *Q) { char temp[150]={0}; sprintf(temp,"Quaternion(w,x,y,z) = (%d,%d,%d,%d)\n",Q->w,Q->x,Q->y,Q->z); putsUART1(temp); } // To be use with the Teapot demo (tested) void MCU::UART1Teapot(uint8_t *buffer8) { char teapot[14]={ '$', 0x02, 0,0, 0,0, 0,0, 0,0, 0x00, 0x00, '\r', '\n' }; teapot[2] = buffer8[0]; teapot[3] = buffer8[1]; teapot[4] = buffer8[4]; teapot[5] = buffer8[5]; teapot[6] = buffer8[8]; teapot[7] = buffer8[9]; teapot[8] = buffer8[12]; teapot[9] = buffer8[13]; for(int i=0;i<14;i++) { putcUART1(teapot[i]); } teapot[11]++; } /* void MCU::UART2Send(const char *data) { putsUART2(data); } uint8_t MCU::UART2Read() { } void MCU::UART2PrintERR(uint8_t a) { switch(a) { case 1: putsUART2("Erreur 1 survenue"); // break; case 2: putsUART2("Erreur 2 survenue"); break; default : putsUART2("Erreur inconnue"); break; } putsUART1("\n"); } */ // Not tested yet // Send the address of a device and wait for ACK then return uint8_t MCU::I2CDeviceReady(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr) { // Wait for EEPROM to complete write process, by polling the ack status. BOOL Acknowledged = FALSE; uint8_t error_code = 0; int j=50; char temp[300]={0}; uint32_t timeout=TIMEOUT_DELAY; do { timeout--; if(timeout==0) { sprintf(temp,"I2CDeviceReady( I2C_module:%s , devAddr=0x%X ) \n" "-------Request has timed out !\n",I2C_MODULE_ID,devAddr); this->UART1Send(temp); error_code = 10; break; } if( 0!=StartTransfer(I2C_MODULE_ID, FALSE) ) { sprintf(temp,"I2CDeviceReady( I2C_module:%s , devAddr=0x%X ) \n" "-------Failed to send start bit\n" "-------Suspected BUS collision\n",I2C_MODULE_ID,devAddr); this->UART1Send(temp); error_code = 1; } if(error_code==0 && TransmitOneByte(I2C_MODULE_ID, devAddr<<1)) { if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was not acknowledged\n"); sprintf(temp,"I2CDeviceReady( I2C_module:%s , devAddr=0x%X ) \n" "-------Failed to ACK devAddr \n" ,I2C_MODULE_ID,devAddr); this->UART1Send(temp); error_code = 2; } else { Acknowledged = TRUE; } } else { sprintf(temp,"I2CDeviceReady( I2C_module:%s , devAddr=0x%X ) \n" "-------MCU failed to transmit devAddr\n" "-------Suspected BUS collision\n",I2C_MODULE_ID,devAddr); this->UART1Send(temp); error_code = 1; } // End the transfer (stop here if an error occured) StopTransfer(I2C_MODULE_ID); } while (j && Acknowledged != TRUE); return error_code; } /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // I have devided the read and write functions in 2 stages : I2CWriteBytes and I2Cwritebytes (etc...) // the lowercase one do the actual read/write and return with the error_code (ref. in function UART1PrintERR) // the Uppercase should coop with the returned error_code // (for the moment I use the Big-Fat-Uggly-reset-everything methode which doesn't work so well...) /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// uint8_t MCU::I2CWriteBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataTX, uint8_t DataSize) { uint8_t error_code; uint8_t reset_code; uint8_t retry = NB_RETRY; uint16_t j; char temp[200]={0}; if(DataSize==0) { error_code = 12; this->UART1PrintERR(error_code); return 12; } while(retry--) { error_code = this->I2CwriteBytes(I2C_MODULE_ID, devAddr, regAddr, DataTX, DataSize); if(error_code==0) break; this->UART1PrintERR(error_code); reset_code = this->I2CReset(I2C_MODULE_ID,error_code); sprintf(temp,"I2CWriteBytes failed with error code : %d\n reset_code = %d\n",error_code,reset_code); this->UART1Send(temp); j=100;while(j--); } return error_code==0; } uint8_t MCU::I2CWriteWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataTX, uint8_t DataSize) { uint8_t error_code; uint8_t reset_code; uint8_t retry = NB_RETRY; uint16_t j; char temp[200]={0}; if(DataSize==0) { error_code = 12; this->UART1PrintERR(error_code); return 12; } while(retry--) { error_code = this->I2CwriteWords(I2C_MODULE_ID, devAddr, regAddr, DataTX, DataSize); if(error_code==0) break; this->UART1PrintERR(error_code); reset_code = this->I2CReset(I2C_MODULE_ID,error_code); sprintf(temp,"I2CWriteBytes failed with error code : %d\n reset_code = %d\n",error_code,reset_code); this->UART1Send(temp); j=100;while(j--); } return error_code==0; } uint8_t MCU::I2CReadBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataRX, uint8_t DataSize) { uint8_t error_code; uint8_t reset_code; uint8_t retry = NB_RETRY; uint16_t j; char temp[200]={0}; if(DataSize==0) { error_code = 12; this->UART1PrintERR(error_code); // return 12; DataSize++; } while(retry--) { error_code = this->I2CreadBytes(I2C_MODULE_ID, devAddr, regAddr, DataRX, &DataSize); if(error_code==0) break; this->UART1PrintERR(error_code); reset_code = this->I2CReset(I2C_MODULE_ID,error_code); sprintf(temp,"I2CWriteBytes failed with error code : %d\n reset_code = %d\n",error_code,reset_code); this->UART1Send(temp); j=100;while(j--); } // For the moment the return is the intended length, not the actual one... return DataSize; } uint8_t MCU::I2CReadWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataRX, uint8_t DataSize) { uint8_t error_code; uint8_t reset_code; uint8_t retry = NB_RETRY; uint16_t j; char temp[200]={0}; if(DataSize==0) { error_code = 12; this->UART1PrintERR(error_code); // return 12; DataSize++; } while(retry--) { error_code = this->I2CreadWords(I2C_MODULE_ID, devAddr, regAddr, DataRX, &DataSize); if(error_code==0) break; this->UART1PrintERR(error_code); reset_code = this->I2CReset(I2C_MODULE_ID,error_code); sprintf(temp,"I2CWriteBytes failed with error code : %d\n reset_code = %d\n",error_code,reset_code); this->UART1Send(temp); j=100;while(j--); } // For the moment the return is the intended length, not the actual one... return DataSize; } uint32_t MCU::getPBCLK() { return PBCLK; } uint32_t MCU::getSYSCLK() { return SYSCLK; } // To be improved void MCU::wait(uint32_t i) // i MICRO sec to wait { uint64_t j = (((uint64_t)SYSCLK)/1000000)* i/2 ; uint64_t time=((uint64_t)ReadCoreTimer())+j; // char temp[100]; // sprintf(temp,"CoreTimer = %d\n time set = %d\n",ReadCoreTimer(),time); // this->UART1Send(temp); bool a = TRUE; while(a) { if(ReadCoreTimer() > time) a = FALSE; } } ///////////////////////////////////////////////////////////////////////////////////// //////////// PRIVATE FUNCTIONS ///////////////////////////////////////////////////////////////////////////////////// // Send a start signal uint8_t MCU::StartTransfer(I2C_MODULE I2C_MODULE_ID, BOOL restart) { I2C_STATUS status; uint8_t error_code=0; uint16_t j; // Wait for the bus to be idle, then start the transfer j=20; while(j-- &&!I2CBusIsIdle(I2C_MODULE_ID) ); if(j==0) { DBPRINTF("Error: I2C Hangs on Idle\n"); error_code = 4; // I2CBus hangs on Idle return error_code; } // Send the Start (or Restart) signal if(restart) { if(I2CRepeatStart(I2C_MODULE_ID)) { DBPRINTF("Error: Bus collision during transfer Restart\n"); error_code = 3; return error_code; } } else { if(I2CStart(I2C_MODULE_ID)) { DBPRINTF("Error: Bus collision during transfer Start\n"); error_code = 3; return error_code; } } j=TIMEOUT_DELAY; // Wait for the signal to complete do { status = I2CGetStatus(I2C_MODULE_ID); } while ( j-- && !(status & I2C_START) ); if(j==0) { DBPRINTF("Error: Bus collision during transfer start\n"); error_code = 4; // I2CBus hangs on Idle return error_code; } return error_code; } // Send one byte uint8_t MCU::TransmitOneByte(I2C_MODULE I2C_MODULE_ID, uint8_t data ) { uint8_t error_code = 0; uint16_t j; // Wait for the transmitter to be ready j=TIMEOUT_DELAY; while(j-- && !I2CTransmitterIsReady(I2C_MODULE_ID)); if(j==0) { DBPRINTF("Error: I2C transmitter not ready\n"); error_code = 5; // I2C transmitter not ready return error_code; } // Transmit the byte if(I2CSendByte(I2C_MODULE_ID, data) == I2C_MASTER_BUS_COLLISION) { DBPRINTF("Error: I2C Master Bus Collision during transfer\n"); error_code = 6; return error_code; } // Wait for the transmission to finish j=TIMEOUT_DELAY; while(j-- && !I2CTransmissionHasCompleted(I2C_MODULE_ID)); if(j==0) { DBPRINTF("Error: I2C hangs during transmission\n"); error_code = 7; //I2C hangs during transmission return error_code; } return error_code; } // Send a stop signal uint8_t MCU::StopTransfer(I2C_MODULE I2C_MODULE_ID ) { I2C_STATUS status; uint8_t error_code = 0; uint16_t j=TIMEOUT_DELAY; // Send the Stop signal I2CStop(I2C_MODULE_ID); // Wait for the signal to complete do { status = I2CGetStatus(I2C_MODULE_ID); } while (j-- && !(status & I2C_STOP) ); if(j==0) { DBPRINTF("Error: I2C unable to stop transmission\n"); error_code = 8; return error_code; } return error_code; } // Second stage function (ref I2CWriteByte) // uint8_t MCU::I2CwriteBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataTX, uint8_t DataSize) { uint8_t Index=0; uint8_t error_code=0; uint8_t j=0; error_code = StartTransfer(I2C_MODULE_ID, FALSE); if(error_code) { DBPRINTF("Error: Start Transfer failed\n"); this->UART1Send("I2CWriteBytes exited on Start transfer \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, devAddr<<1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr) failed\n"); this->UART1Send("I2CWriteBytes exited on devAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteBytes exited on devAddr NACK \n"); error_code = 2; return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, regAddr); if(error_code) { DBPRINTF("Error: Transmit One Byte (regAddr) failed\n"); this->UART1Send("I2CWriteBytes exited on RegAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteBytes exited on regAddr NACK \n"); return error_code; } while(error_code==0 && DataSize-Index) { j=100;while(j--); error_code=TransmitOneByte(I2C_MODULE_ID, DataTX[Index++]); if(error_code) { DBPRINTF("Error: Transmit One Byte DataTX[Index] failed\n"); this->UART1Send("I2CWriteBytes exited on DataTX[Index] sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteBytes exited on devAddr+1 NACK \n"); error_code = 2; return error_code; } } error_code = StopTransfer(I2C_MODULE_ID); if(error_code) { DBPRINTF("Error: Stop Transfer failed\n"); this->UART1Send("I2CWriteBytes exited on Stop transfer \n"); return error_code; } return error_code; } uint8_t MCU::I2CwriteWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataTX, uint8_t DataSize) { uint8_t Index=0; uint8_t error_code=0; error_code = StartTransfer(I2C_MODULE_ID, FALSE); if(error_code) { DBPRINTF("Error: Start Transfer failed\n"); this->UART1Send("I2CWriteWords exited on Start transfer \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, devAddr<<1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr) failed\n"); this->UART1Send("I2CWriteWords exited on devAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteWords exited on devAddr NACK \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, regAddr); if(error_code) { DBPRINTF("Error: Transmit One Byte (regAddr) failed\n"); this->UART1Send("I2CWriteWords exited on RegAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteWords exited on regAddr NACK \n"); return error_code; } while(error_code==0 && DataSize-Index) { // j=100;while(j--); error_code=TransmitOneByte(I2C_MODULE_ID, (uint8_t)(DataTX[Index] >> 8) ); // Send MSB if(error_code) { DBPRINTF("Error: Transmit One Byte DataTX[Index] (MSB) failed\n"); this->UART1Send("I2CWriteWords exited on DataTX[Index] (MSB) sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteWords exited on devAddr+1 NACK \n"); return error_code; } // j=100;while(j--); error_code=TransmitOneByte(I2C_MODULE_ID, (uint8_t)(DataTX[Index++])); // Send LSB if(error_code) { DBPRINTF("Error: Transmit One Byte DataTX[Index] (LSB) failed\n"); this->UART1Send("I2CWriteWords exited on DataTX[Index] (LSB) sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CWriteWords exited on devAddr+1 NACK \n"); error_code = 2; return error_code; } } error_code = StopTransfer(I2C_MODULE_ID); if(error_code) { DBPRINTF("Error: Stop Transfer failed\n"); this->UART1Send("I2CWriteWords exited on Stop transfer \n"); return error_code; } return error_code; } uint8_t MCU::I2CreadBytes(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint8_t *DataRX, uint8_t *DataSize) { uint8_t Index=0; uint8_t error_code=0; uint16_t j; // j=100;while(j--); error_code = StartTransfer(I2C_MODULE_ID, FALSE); if(error_code) { DBPRINTF("Error: Start Transfer failed\n"); this->UART1Send("I2CReadBytes exited on Start transfer \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, devAddr<<1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr) failed\n"); this->UART1Send("I2CReadBytes exited on devAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadBytes exited on devAddr NACK \n"); error_code = 2; return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, regAddr); if(error_code) { DBPRINTF("Error: Transmit One Byte (regAddr) failed\n"); this->UART1Send("I2CReadBytes exited on RegAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadBytes exited on regAddr NACK \n"); error_code = 2; return error_code; } error_code = StartTransfer(I2C_MODULE_ID, TRUE); if(error_code) { DBPRINTF("Error: Restart Transfer failed\n"); this->UART1Send("I2CReadBytes exited on restart \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, (devAddr<<1) +1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr+1) failed\n"); this->UART1Send("I2CReadBytes exited on devAddr+1 sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadBytes exited on devAddr+1 NACK \n"); error_code = 2; return error_code; } while(error_code==0 && *DataSize-Index) { if(I2CReceiverEnable(I2C_MODULE_ID, TRUE)) // return 0 if success { error_code = 9; DBPRINTF("Error: I2C Receiver overflow\n"); this->UART1Send("I2CReadBytes exited on Receiver overflow \n"); return error_code; } else { j=TIMEOUT_DELAY; while(j-- && !I2CReceivedDataIsAvailable(I2C_MODULE_ID)); if(j==0) { error_code = 10; DBPRINTF("Error: Slave reply has timed out\n"); this->UART1Send("I2CReadBytes exited on Slave reply timeout \n"); return error_code; } else { DataRX[Index] = I2CGetByte(I2C_MODULE_ID); Index++; if(*DataSize == Index) I2CAcknowledgeByte(I2C1, FALSE); else I2CAcknowledgeByte(I2C1, TRUE); j=TIMEOUT_DELAY; while(j-- && !I2CAcknowledgeHasCompleted(I2C_MODULE_ID)); if(j==0) { error_code = 11; DBPRINTF("Error: I2CReadBytes exited when sending (N)ACK\n"); this->UART1Send("I2CReadBytes exited when sending (N)ACK \n"); return error_code; } } } } error_code = StopTransfer(I2C_MODULE_ID); if(error_code) { DBPRINTF("Error: Stop Transfer failed\n"); this->UART1Send("I2CReadBytes exited on Stop transfer \n"); return error_code; } return error_code; } uint8_t MCU::I2CreadWords(I2C_MODULE I2C_MODULE_ID, uint8_t devAddr, uint8_t regAddr, uint16_t *DataRX, uint8_t *DataSize) { uint8_t Index=0; uint8_t error_code=0; uint16_t j; bool MSB = TRUE; j=100;while(j--); error_code = StartTransfer(I2C_MODULE_ID, FALSE); if(error_code) { DBPRINTF("Error: Start Transfer failed\n"); this->UART1Send("I2CReadWords exited on Start transfer \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, devAddr<<1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr) failed\n"); this->UART1Send("I2CReadWords exited on devAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadWords exited on devAddr NACK \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, regAddr); if(error_code) { DBPRINTF("Error: Transmit One Byte (regAddr) failed\n"); this->UART1Send("I2CReadWords exited on RegAddr sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadWords exited on regAddr NACK \n"); return error_code; } error_code = StartTransfer(I2C_MODULE_ID, TRUE); if(error_code) { DBPRINTF("Error: Restart Transfer failed\n"); this->UART1Send("I2CReadWords exited on restart \n"); return error_code; } error_code=TransmitOneByte(I2C_MODULE_ID, (devAddr<<1) +1); if(error_code) { DBPRINTF("Error: Transmit One Byte (devAddr+1) failed\n"); this->UART1Send("I2CReadWords exited on devAddr+1 sent \n"); return error_code; } if(!I2CByteWasAcknowledged(I2C_MODULE_ID)) { error_code = 2; DBPRINTF("Error: Address byte was NACK\n"); this->UART1Send("I2CReadWords exited on devAddr+1 NACK \n"); return error_code; } while(error_code==0 && *DataSize-Index) { if(I2CReceiverEnable(I2C_MODULE_ID, TRUE)) // return 0 if success { error_code = 9; DBPRINTF("Error: I2C Receiver overflow\n"); this->UART1Send("I2CReadWords exited on Receiver overflow \n"); return error_code; } else { j=TIMEOUT_DELAY; while(j-- && !I2CReceivedDataIsAvailable(I2C_MODULE_ID)); if(j==0) { error_code = 10; DBPRINTF("Error: Slave reply has timed out\n"); this->UART1Send("I2CReadWords exited on Slave reply timeout \n"); return error_code; } else { if(MSB) { DataRX[Index] += I2CGetByte(I2C_MODULE_ID)<<8; MSB = FALSE; } else { DataRX[Index] += I2CGetByte(I2C_MODULE_ID); MSB = TRUE; Index++; } if(*DataSize == Index) I2CAcknowledgeByte(I2C1, FALSE); else I2CAcknowledgeByte(I2C1, TRUE); j=TIMEOUT_DELAY; while(j-- && !I2CAcknowledgeHasCompleted(I2C_MODULE_ID)); if(j==0) { error_code = 11; DBPRINTF("Error: I2CReadWords exited when sending (N)ACK\n"); this->UART1Send("I2CReadWords exited when sending (N)ACK \n"); return error_code; } } } } error_code = StopTransfer(I2C_MODULE_ID); if(error_code) { DBPRINTF("Error: Stop Transfer failed\n"); this->UART1Send("I2CReadBytes exited on Stop transfer \n"); return error_code; } return error_code; } uint8_t MCU::I2CReset(I2C_MODULE I2C_MODULE_ID, uint8_t error_code) { uint16_t j=TIMEOUT_DELAY; uint8_t reset_code=0; this->TransmitOneByte(I2C_MODULE_ID,0); I2CAcknowledgeByte(I2C1, FALSE); while(j-- && !I2CAcknowledgeHasCompleted(I2C_MODULE_ID)); if(j==0) { I2CStop(I2C_MODULE_ID); this->wait(RESET_DELAY); I2CEnable(I2C_MODULE_ID, FALSE); this->wait(RESET_DELAY); I2CEnable(I2C_MODULE_ID, TRUE); this->wait(RESET_DELAY); } else { this->StopTransfer(I2C_MODULE_ID); } // error_code = this->I2CDeviceReady(I2C_MODULE_ID,0x68); return reset_code; } Test main function : (this one is a mess but if you have the hardware you can test the teapot example with it) ////////////////////////////////////// // PIC32MX250 main configuration ////////////////////////////////////// // DEVCFG3 // USERID = No Setting #pragma config PMDL1WAY = OFF // Peripheral Module Disable Configuration (Allow only one reconfiguration) #pragma config IOL1WAY = OFF // Peripheral Pin Select Configuration (Allow only one reconfiguration) #pragma config FUSBIDIO = OFF // USB USID Selection (Controlled by the USB Module) #pragma config FVBUSONIO = OFF // USB VBUS ON Selection (Controlled by USB Module) // DEVCFG2 // Fastest SYSCLK stable : 4MHz * 17 = 68MHz #pragma config FPLLIDIV = DIV_4 // PLL Input Divider (4x Divider) #pragma config FPLLMUL = MUL_20 // PLL Multiplier (17x Multiplier) #pragma config UPLLIDIV = DIV_1 // USB PLL Input Divider (1x Divider) #pragma config UPLLEN = OFF // USB PLL Enable (Disabled and Bypassed) #pragma config FPLLODIV = DIV_2 // System PLL Output Clock Divider (PLL Divide by 1) // DEVCFG1 #pragma config FNOSC = FRCPLL // Oscillator Selection Bits (Fast RC Osc with PLL) #pragma config FSOSCEN = OFF // Secondary Oscillator Enable (Enabled) #pragma config IESO = OFF // Internal/External Switch Over (Enabled) #pragma config POSCMOD = OFF // Primary Oscillator Configuration (Primary osc disabled) #pragma config OSCIOFNC = OFF // CLKO Output Signal Active on the OSCO Pin (Disabled) #pragma config FPBDIV = DIV_1 // Peripheral Clock Divisor (Pb_Clk is Sys_Clk/1) #pragma config FCKSM = CSDCMD // Clock Switching and Monitor Selection (Clock Switch Disable, FSCM Disabled) #pragma config WDTPS = PS1 // Watchdog Timer Postscaler (1:1048576) #pragma config WINDIS = OFF // Watchdog Timer Window Enable (Watchdog Timer is in Non-Window Mode) #pragma config FWDTEN = OFF // Watchdog Timer Enable (WDT Enabled) #pragma config FWDTWINSZ = WISZ_25 // Watchdog Timer Window Size (Window Size is 25%) // DEVCFG0 #pragma config DEBUG = ON // #pragma config JTAGEN = OFF // JTAG Enable (JTAG Port Enabled) #pragma config ICESEL = ICS_PGx2 // ICE/ICD Comm Channel Select (Communicate on PGEC1/PGED1) #pragma config PWP = OFF // Program Flash Write Protect (Disable) #pragma config BWP = OFF // Boot Flash Write Protect bit (Protection Disabled) #pragma config CP = OFF // Code Protect (Protection Disabled) ////////////////////////////////////// // System const ////////////////////////////////////// //#define SYSCLK 40000000 //#define PBCLK SYSCLK/1 //#define GetPeripheralClock() PBCLK //#define Fsck 100000 //#define GetInstructionClock() (SYS_CLOCK) //#define I2C_CLOCK_FREQ Fsck //#define BRG_VAL 0x30 //0x30 400kHz //0xC6 100kHz ////////////////////////////////////// // Program const ////////////////////////////////////// #define Arduino 0x60 #define MPUaddr 0x68 #define MPU_I2C_BUS I2C1 #define LED1 PORTBbits.RB0 #define LED1dir TRISBbits.TRISB0 ////////////////////////////////////// // Includes ////////////////////////////////////// #include <stdint.h> #include <p32xxxx.h> #include <plib.h> #include <math.h> #include "MCU.h" #include "MPU6050.h" #include "helper_3dmath.h" ////////////////////////////////////// // Globale variables ////////////////////////////////////// MCU *pACU; // to be specified with "extern MCU *pACU;" in other header files ////////////////////////////////////// // Functions declaration ////////////////////////////////////// ////////////////////////////////////// // MAIN functions ////////////////////////////////////// int main() { SYSTEMConfigPerformance(40000000); // Fastest SYSCLK stable on breadboard uint8_t addr[50]={0}; uint8_t buffer8[100]={0}; int16_t buffer16[100]={0}; uint16_t fifoCount; uint16_t packetSize; uint32_t j; char temp[500]={0}; Quaternion Q; // [w, x, y, z] quaternion container VectorInt16 aa; // [x, y, z] accel sensor measurements VectorInt16 aaReal; // [x, y, z] gravity-free accel sensor measurements VectorInt16 aaWorld; // [x, y, z] world-frame accel sensor measurements VectorFloat gravity; // [x, y, z] gravity vector MCU ACU(40000000,40000000); // MCU object constructor call pACU = &ACU; // assigning object to global pointer MPU6050 MPU(I2C1); // MPU6050 object constructor call LED1dir = 0; LED1 = 0; ACU.I2CSetup(I2C1,400000); ACU.UART1Setup(115200); ACU.INTSetup(); ACU.UART1Send("ACU Initialized ! \n\n"); j=100000;while(j--); // wait a while. I think it's a breadboard related issue // but many communications error are solved if we wait a bit // MPU.MPUsetupRAW(); // New MPU6050 functions MPU.MPUsetupDMP(); // they do what the Setup() function do on the arduino example packetSize = MPU.dmpGetFIFOPacketSize(); sprintf(temp,"packetSize : %d\n\n",packetSize); // create a string with variable value ACU.UART1Send(temp); // print the string on the UART module while(1) { do{ fifoCount = MPU.getFIFOCount(); }while (fifoCount <= packetSize); MPU.getFIFOBytes(buffer8,packetSize); ACU.UART1Teapot(buffer8); } while(1) { LED1 = 1; j=10000000;while(j--); LED1 = 0; j=10000000;while(j--); } return 0; } MPU6050.h : // I2Cdev library collection - MPU6050 I2C device class // Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00) // 10/3/2011 by Jeff Rowberg <jeff@rowberg.net> // Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib // // Changelog: // ... - ongoing debug release // NOTE: THIS IS ONLY A PARIAL RELEASE. THIS DEVICE CLASS IS CURRENTLY UNDERGOING ACTIVE // DEVELOPMENT AND IS STILL MISSING SOME IMPORTANT FEATURES. PLEASE KEEP THIS IN MIND IF // YOU DECIDE TO USE THIS PARTICULAR CODE FOR ANYTHING. /* ============================================ I2Cdev device library code is placed under the MIT license Copyright (c) 2012 Jeff Rowberg Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. =============================================== */ #ifndef _MPU6050_H_ #define _MPU6050_H_ #include <plib.h> #include "MCU.h" #include "I2Cdev.h" #include "helper_3dmath.h" #include "stdint.h" #include <stdlib.h> //#include <string.h> #define PROGMEM #define PGM_P const char * #define PSTR(s) (s) #define F(x) x #define pgm_read_byte(x) (*((char *)x)) #define pgm_read_byte_near(x) (*((char *)x)) #define pgm_read_byte_far(x) (*((char *)x)) #define pgm_read_word(x) (*((short *)x)) #define pgm_read_word_near(x) (*((short *)x)) #define pgm_read_word_far(x) (*((short *)x)) #define pgm_read_dword(x) (*((long *)x)) #define pgm_read_dword_near(x) (*((long *)x)) #define pgm_read_dword_far(x) (*((long *)x)) #define pgm_read_float(x) (*((float *)x)) #define pgm_read_float_near(x) (*((float *)x)) #define pgm_read_float_far(x) (*((float *)x)) #define prog_void const void #define prog_char const char #define prog_uchar const unsigned char #define prog_int8_t const int8_t #define prog_uint8_t const uint8_t #define prog_int16_t const int16_t #define prog_uint16_t const uint16_t #define prog_int32_t const int32_t #define prog_uint32_t const uint32_t #define prog_int64_t const int64_t #define prog_uint64_t const uint64_t #define strcpy_P(dest, src) strcpy((dest), (src)) #define strcat_P(dest, src) strcat((dest), (src)) #define strcmp_P(a, strcmp((a), () //#define DEBUG #ifdef DEBUG #define DEBUG_PRINT(x) Serial.print(x) #define DEBUG_PRINTF(x, y) Serial.print(x, y) #define DEBUG_PRINTLN(x) Serial.println(x) #define DEBUG_PRINTLNF(x, y) Serial.println(x, y) #else #define DEBUG_PRINT(x) #define DEBUG_PRINTF(x, y) #define DEBUG_PRINTLN(x) #define DEBUG_PRINTLNF(x, y) #endif #define MPU6050_DMP_CODE_SIZE 1929 // dmpMemory[] #define MPU6050_DMP_CONFIG_SIZE 192 // dmpConfig[] #define MPU6050_DMP_UPDATES_SIZE 47 // dmpUpdates[] #define MPU6050_ADDRESS_AD0_LOW 0x68 // address pin low (GND), default for InvenSense evaluation board #define MPU6050_ADDRESS_AD0_HIGH 0x69 // address pin high (VCC) #define MPU6050_DEFAULT_ADDRESS MPU6050_ADDRESS_AD0_LOW #define MPU6050_RA_XG_OFFS_TC 0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD #define MPU6050_RA_YG_OFFS_TC 0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD #define MPU6050_RA_ZG_OFFS_TC 0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD #define MPU6050_RA_X_FINE_GAIN 0x03 //[7:0] X_FINE_GAIN #define MPU6050_RA_Y_FINE_GAIN 0x04 //[7:0] Y_FINE_GAIN #define MPU6050_RA_Z_FINE_GAIN 0x05 //[7:0] Z_FINE_GAIN #define MPU6050_RA_XA_OFFS_H 0x06 //[15:0] XA_OFFS #define MPU6050_RA_XA_OFFS_L_TC 0x07 #define MPU6050_RA_YA_OFFS_H 0x08 //[15:0] YA_OFFS #define MPU6050_RA_YA_OFFS_L_TC 0x09 #define MPU6050_RA_ZA_OFFS_H 0x0A //[15:0] ZA_OFFS #define MPU6050_RA_ZA_OFFS_L_TC 0x0B #define MPU6050_RA_XG_OFFS_USRH 0x13 //[15:0] XG_OFFS_USR #define MPU6050_RA_XG_OFFS_USRL 0x14 #define MPU6050_RA_YG_OFFS_USRH 0x15 //[15:0] YG_OFFS_USR #define MPU6050_RA_YG_OFFS_USRL 0x16 #define MPU6050_RA_ZG_OFFS_USRH 0x17 //[15:0] ZG_OFFS_USR #define MPU6050_RA_ZG_OFFS_USRL 0x18 #define MPU6050_RA_SMPLRT_DIV 0x19 #define MPU6050_RA_CONFIG 0x1A #define MPU6050_RA_GYRO_CONFIG 0x1B #define MPU6050_RA_ACCEL_CONFIG 0x1C #define MPU6050_RA_FF_THR 0x1D #define MPU6050_RA_FF_DUR 0x1E #define MPU6050_RA_MOT_THR 0x1F #define MPU6050_RA_MOT_DUR 0x20 #define MPU6050_RA_ZRMOT_THR 0x21 #define MPU6050_RA_ZRMOT_DUR 0x22 #define MPU6050_RA_FIFO_EN 0x23 #define MPU6050_RA_I2C_MST_CTRL 0x24 #define MPU6050_RA_I2C_SLV0_ADDR 0x25 #define MPU6050_RA_I2C_SLV0_REG 0x26 #define MPU6050_RA_I2C_SLV0_CTRL 0x27 #define MPU6050_RA_I2C_SLV1_ADDR 0x28 #define MPU6050_RA_I2C_SLV1_REG 0x29 #define MPU6050_RA_I2C_SLV1_CTRL 0x2A #define MPU6050_RA_I2C_SLV2_ADDR 0x2B #define MPU6050_RA_I2C_SLV2_REG 0x2C #define MPU6050_RA_I2C_SLV2_CTRL 0x2D #define MPU6050_RA_I2C_SLV3_ADDR 0x2E #define MPU6050_RA_I2C_SLV3_REG 0x2F #define MPU6050_RA_I2C_SLV3_CTRL 0x30 #define MPU6050_RA_I2C_SLV4_ADDR 0x31 #define MPU6050_RA_I2C_SLV4_REG 0x32 #define MPU6050_RA_I2C_SLV4_DO 0x33 #define MPU6050_RA_I2C_SLV4_CTRL 0x34 #define MPU6050_RA_I2C_SLV4_DI 0x35 #define MPU6050_RA_I2C_MST_STATUS 0x36 #define MPU6050_RA_INT_PIN_CFG 0x37 #define MPU6050_RA_INT_ENABLE 0x38 #define MPU6050_RA_DMP_INT_STATUS 0x39 #define MPU6050_RA_INT_STATUS 0x3A #define MPU6050_RA_ACCEL_XOUT_H 0x3B #define MPU6050_RA_ACCEL_XOUT_L 0x3C #define MPU6050_RA_ACCEL_YOUT_H 0x3D #define MPU6050_RA_ACCEL_YOUT_L 0x3E #define MPU6050_RA_ACCEL_ZOUT_H 0x3F #define MPU6050_RA_ACCEL_ZOUT_L 0x40 #define MPU6050_RA_TEMP_OUT_H 0x41 #define MPU6050_RA_TEMP_OUT_L 0x42 #define MPU6050_RA_GYRO_XOUT_H 0x43 #define MPU6050_RA_GYRO_XOUT_L 0x44 #define MPU6050_RA_GYRO_YOUT_H 0x45 #define MPU6050_RA_GYRO_YOUT_L 0x46 #define MPU6050_RA_GYRO_ZOUT_H 0x47 #define MPU6050_RA_GYRO_ZOUT_L 0x48 #define MPU6050_RA_EXT_SENS_DATA_00 0x49 #define MPU6050_RA_EXT_SENS_DATA_01 0x4A #define MPU6050_RA_EXT_SENS_DATA_02 0x4B #define MPU6050_RA_EXT_SENS_DATA_03 0x4C #define MPU6050_RA_EXT_SENS_DATA_04 0x4D #define MPU6050_RA_EXT_SENS_DATA_05 0x4E #define MPU6050_RA_EXT_SENS_DATA_06 0x4F #define MPU6050_RA_EXT_SENS_DATA_07 0x50 #define MPU6050_RA_EXT_SENS_DATA_08 0x51 #define MPU6050_RA_EXT_SENS_DATA_09 0x52 #define MPU6050_RA_EXT_SENS_DATA_10 0x53 #define MPU6050_RA_EXT_SENS_DATA_11 0x54 #define MPU6050_RA_EXT_SENS_DATA_12 0x55 #define MPU6050_RA_EXT_SENS_DATA_13 0x56 #define MPU6050_RA_EXT_SENS_DATA_14 0x57 #define MPU6050_RA_EXT_SENS_DATA_15 0x58 #define MPU6050_RA_EXT_SENS_DATA_16 0x59 #define MPU6050_RA_EXT_SENS_DATA_17 0x5A #define MPU6050_RA_EXT_SENS_DATA_18 0x5B #define MPU6050_RA_EXT_SENS_DATA_19 0x5C #define MPU6050_RA_EXT_SENS_DATA_20 0x5D #define MPU6050_RA_EXT_SENS_DATA_21 0x5E #define MPU6050_RA_EXT_SENS_DATA_22 0x5F #define MPU6050_RA_EXT_SENS_DATA_23 0x60 #define MPU6050_RA_MOT_DETECT_STATUS 0x61 #define MPU6050_RA_I2C_SLV0_DO 0x63 #define MPU6050_RA_I2C_SLV1_DO 0x64 #define MPU6050_RA_I2C_SLV2_DO 0x65 #define MPU6050_RA_I2C_SLV3_DO 0x66 #define MPU6050_RA_I2C_MST_DELAY_CTRL 0x67 #define MPU6050_RA_SIGNAL_PATH_RESET 0x68 #define MPU6050_RA_MOT_DETECT_CTRL 0x69 #define MPU6050_RA_USER_CTRL 0x6A #define MPU6050_RA_PWR_MGMT_1 0x6B #define MPU6050_RA_PWR_MGMT_2 0x6C #define MPU6050_RA_BANK_SEL 0x6D #define MPU6050_RA_MEM_START_ADDR 0x6E #define MPU6050_RA_MEM_R_W 0x6F #define MPU6050_RA_DMP_CFG_1 0x70 #define MPU6050_RA_DMP_CFG_2 0x71 #define MPU6050_RA_FIFO_COUNTH 0x72 #define MPU6050_RA_FIFO_COUNTL 0x73 #define MPU6050_RA_FIFO_R_W 0x74 #define MPU6050_RA_WHO_AM_I 0x75 #define MPU6050_TC_PWR_MODE_BIT 7 #define MPU6050_TC_OFFSET_BIT 6 #define MPU6050_TC_OFFSET_LENGTH 6 #define MPU6050_TC_OTP_BNK_VLD_BIT 0 #define MPU6050_VDDIO_LEVEL_VLOGIC 0 #define MPU6050_VDDIO_LEVEL_VDD 1 #define MPU6050_CFG_EXT_SYNC_SET_BIT 5 #define MPU6050_CFG_EXT_SYNC_SET_LENGTH 3 #define MPU6050_CFG_DLPF_CFG_BIT 2 #define MPU6050_CFG_DLPF_CFG_LENGTH 3 #define MPU6050_EXT_SYNC_DISABLED 0x0 #define MPU6050_EXT_SYNC_TEMP_OUT_L 0x1 #define MPU6050_EXT_SYNC_GYRO_XOUT_L 0x2 #define MPU6050_EXT_SYNC_GYRO_YOUT_L 0x3 #define MPU6050_EXT_SYNC_GYRO_ZOUT_L 0x4 #define MPU6050_EXT_SYNC_ACCEL_XOUT_L 0x5 #define MPU6050_EXT_SYNC_ACCEL_YOUT_L 0x6 #define MPU6050_EXT_SYNC_ACCEL_ZOUT_L 0x7 #define MPU6050_DLPF_BW_256 0x00 #define MPU6050_DLPF_BW_188 0x01 #define MPU6050_DLPF_BW_98 0x02 #define MPU6050_DLPF_BW_42 0x03 #define MPU6050_DLPF_BW_20 0x04 #define MPU6050_DLPF_BW_10 0x05 #define MPU6050_DLPF_BW_5 0x06 #define MPU6050_GCONFIG_FS_SEL_BIT 4 #define MPU6050_GCONFIG_FS_SEL_LENGTH 2 #define MPU6050_GYRO_FS_250 0x00 #define MPU6050_GYRO_FS_500 0x01 #define MPU6050_GYRO_FS_1000 0x02 #define MPU6050_GYRO_FS_2000 0x03 #define MPU6050_ACONFIG_XA_ST_BIT 7 #define MPU6050_ACONFIG_YA_ST_BIT 6 #define MPU6050_ACONFIG_ZA_ST_BIT 5 #define MPU6050_ACONFIG_AFS_SEL_BIT 4 #define MPU6050_ACONFIG_AFS_SEL_LENGTH 2 #define MPU6050_ACONFIG_ACCEL_HPF_BIT 2 #define MPU6050_ACONFIG_ACCEL_HPF_LENGTH 3 #define MPU6050_ACCEL_FS_2 0x00 #define MPU6050_ACCEL_FS_4 0x01 #define MPU6050_ACCEL_FS_8 0x02 #define MPU6050_ACCEL_FS_16 0x03 #define MPU6050_DHPF_RESET 0x00 #define MPU6050_DHPF_5 0x01 #define MPU6050_DHPF_2P5 0x02 #define MPU6050_DHPF_1P25 0x03 #define MPU6050_DHPF_0P63 0x04 #define MPU6050_DHPF_HOLD 0x07 #define MPU6050_TEMP_FIFO_EN_BIT 7 #define MPU6050_XG_FIFO_EN_BIT 6 #define MPU6050_YG_FIFO_EN_BIT 5 #define MPU6050_ZG_FIFO_EN_BIT 4 #define MPU6050_ACCEL_FIFO_EN_BIT 3 #define MPU6050_SLV2_FIFO_EN_BIT 2 #define MPU6050_SLV1_FIFO_EN_BIT 1 #define MPU6050_SLV0_FIFO_EN_BIT 0 #define MPU6050_MULT_MST_EN_BIT 7 #define MPU6050_WAIT_FOR_ES_BIT 6 #define MPU6050_SLV_3_FIFO_EN_BIT 5 #define MPU6050_I2C_MST_P_NSR_BIT 4 #define MPU6050_I2C_MST_CLK_BIT 3 #define MPU6050_I2C_MST_CLK_LENGTH 4 #define MPU6050_CLOCK_DIV_348 0x0 #define MPU6050_CLOCK_DIV_333 0x1 #define MPU6050_CLOCK_DIV_320 0x2 #define MPU6050_CLOCK_DIV_308 0x3 #define MPU6050_CLOCK_DIV_296 0x4 #define MPU6050_CLOCK_DIV_286 0x5 #define MPU6050_CLOCK_DIV_276 0x6 #define MPU6050_CLOCK_DIV_267 0x7 #define MPU6050_CLOCK_DIV_258 0x8 #define MPU6050_CLOCK_DIV_500 0x9 #define MPU6050_CLOCK_DIV_471 0xA #define MPU6050_CLOCK_DIV_444 0xB #define MPU6050_CLOCK_DIV_421 0xC #define MPU6050_CLOCK_DIV_400 0xD #define MPU6050_CLOCK_DIV_381 0xE #define MPU6050_CLOCK_DIV_364 0xF #define MPU6050_I2C_SLV_RW_BIT 7 #define MPU6050_I2C_SLV_ADDR_BIT 6 #define MPU6050_I2C_SLV_ADDR_LENGTH 7 #define MPU6050_I2C_SLV_EN_BIT 7 #define MPU6050_I2C_SLV_BYTE_SW_BIT 6 #define MPU6050_I2C_SLV_REG_DIS_BIT 5 #define MPU6050_I2C_SLV_GRP_BIT 4 #define MPU6050_I2C_SLV_LEN_BIT 3 #define MPU6050_I2C_SLV_LEN_LENGTH 4 #define MPU6050_I2C_SLV4_RW_BIT 7 #define MPU6050_I2C_SLV4_ADDR_BIT 6 #define MPU6050_I2C_SLV4_ADDR_LENGTH 7 #define MPU6050_I2C_SLV4_EN_BIT 7 #define MPU6050_I2C_SLV4_INT_EN_BIT 6 #define MPU6050_I2C_SLV4_REG_DIS_BIT 5 #define MPU6050_I2C_SLV4_MST_DLY_BIT 4 #define MPU6050_I2C_SLV4_MST_DLY_LENGTH 5 #define MPU6050_MST_PASS_THROUGH_BIT 7 #define MPU6050_MST_I2C_SLV4_DONE_BIT 6 #define MPU6050_MST_I2C_LOST_ARB_BIT 5 #define MPU6050_MST_I2C_SLV4_NACK_BIT 4 #define MPU6050_MST_I2C_SLV3_NACK_BIT 3 #define MPU6050_MST_I2C_SLV2_NACK_BIT 2 #define MPU6050_MST_I2C_SLV1_NACK_BIT 1 #define MPU6050_MST_I2C_SLV0_NACK_BIT 0 #define MPU6050_INTCFG_INT_LEVEL_BIT 7 #define MPU6050_INTCFG_INT_OPEN_BIT 6 #define MPU6050_INTCFG_LATCH_INT_EN_BIT 5 #define MPU6050_INTCFG_INT_RD_CLEAR_BIT 4 #define MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT 3 #define MPU6050_INTCFG_FSYNC_INT_EN_BIT 2 #define MPU6050_INTCFG_I2C_BYPASS_EN_BIT 1 #define MPU6050_INTCFG_CLKOUT_EN_BIT 0 #define MPU6050_INTMODE_ACTIVEHIGH 0x00 #define MPU6050_INTMODE_ACTIVELOW 0x01 #define MPU6050_INTDRV_PUSHPULL 0x00 #define MPU6050_INTDRV_OPENDRAIN 0x01 #define MPU6050_INTLATCH_50USPULSE 0x00 #define MPU6050_INTLATCH_WAITCLEAR 0x01 #define MPU6050_INTCLEAR_STATUSREAD 0x00 #define MPU6050_INTCLEAR_ANYREAD 0x01 #define MPU6050_INTERRUPT_FF_BIT 7 #define MPU6050_INTERRUPT_MOT_BIT 6 #define MPU6050_INTERRUPT_ZMOT_BIT 5 #define MPU6050_INTERRUPT_FIFO_OFLOW_BIT 4 #define MPU6050_INTERRUPT_I2C_MST_INT_BIT 3 #define MPU6050_INTERRUPT_PLL_RDY_INT_BIT 2 #define MPU6050_INTERRUPT_DMP_INT_BIT 1 #define MPU6050_INTERRUPT_DATA_RDY_BIT 0 // TODO: figure out what these actually do // UMPL source code is not very obivous #define MPU6050_DMPINT_5_BIT 5 #define MPU6050_DMPINT_4_BIT 4 #define MPU6050_DMPINT_3_BIT 3 #define MPU6050_DMPINT_2_BIT 2 #define MPU6050_DMPINT_1_BIT 1 #define MPU6050_DMPINT_0_BIT 0 #define MPU6050_MOTION_MOT_XNEG_BIT 7 #define MPU6050_MOTION_MOT_XPOS_BIT 6 #define MPU6050_MOTION_MOT_YNEG_BIT 5 #define MPU6050_MOTION_MOT_YPOS_BIT 4 #define MPU6050_MOTION_MOT_ZNEG_BIT 3 #define MPU6050_MOTION_MOT_ZPOS_BIT 2 #define MPU6050_MOTION_MOT_ZRMOT_BIT 0 #define MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT 7 #define MPU6050_DELAYCTRL_I2C_SLV4_DLY_EN_BIT 4 #define MPU6050_DELAYCTRL_I2C_SLV3_DLY_EN_BIT 3 #define MPU6050_DELAYCTRL_I2C_SLV2_DLY_EN_BIT 2 #define MPU6050_DELAYCTRL_I2C_SLV1_DLY_EN_BIT 1 #define MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT 0 #define MPU6050_PATHRESET_GYRO_RESET_BIT 2 #define MPU6050_PATHRESET_ACCEL_RESET_BIT 1 #define MPU6050_PATHRESET_TEMP_RESET_BIT 0 #define MPU6050_DETECT_ACCEL_ON_DELAY_BIT 5 #define MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH 2 #define MPU6050_DETECT_FF_COUNT_BIT 3 #define MPU6050_DETECT_FF_COUNT_LENGTH 2 #define MPU6050_DETECT_MOT_COUNT_BIT 1 #define MPU6050_DETECT_MOT_COUNT_LENGTH 2 #define MPU6050_DETECT_DECREMENT_RESET 0x0 #define MPU6050_DETECT_DECREMENT_1 0x1 #define MPU6050_DETECT_DECREMENT_2 0x2 #define MPU6050_DETECT_DECREMENT_4 0x3 #define MPU6050_USERCTRL_DMP_EN_BIT 7 #define MPU6050_USERCTRL_FIFO_EN_BIT 6 #define MPU6050_USERCTRL_I2C_MST_EN_BIT 5 #define MPU6050_USERCTRL_I2C_IF_DIS_BIT 4 #define MPU6050_USERCTRL_DMP_RESET_BIT 3 #define MPU6050_USERCTRL_FIFO_RESET_BIT 2 #define MPU6050_USERCTRL_I2C_MST_RESET_BIT 1 #define MPU6050_USERCTRL_SIG_COND_RESET_BIT 0 #define MPU6050_PWR1_DEVICE_RESET_BIT 7 #define MPU6050_PWR1_SLEEP_BIT 6 #define MPU6050_PWR1_CYCLE_BIT 5 #define MPU6050_PWR1_TEMP_DIS_BIT 3 #define MPU6050_PWR1_CLKSEL_BIT 2 #define MPU6050_PWR1_CLKSEL_LENGTH 3 #define MPU6050_CLOCK_INTERNAL 0x00 #define MPU6050_CLOCK_PLL_XGYRO 0x01 #define MPU6050_CLOCK_PLL_YGYRO 0x02 #define MPU6050_CLOCK_PLL_ZGYRO 0x03 #define MPU6050_CLOCK_PLL_EXT32K 0x04 #define MPU6050_CLOCK_PLL_EXT19M 0x05 #define MPU6050_CLOCK_KEEP_RESET 0x07 #define MPU6050_PWR2_LP_WAKE_CTRL_BIT 7 #define MPU6050_PWR2_LP_WAKE_CTRL_LENGTH 2 #define MPU6050_PWR2_STBY_XA_BIT 5 #define MPU6050_PWR2_STBY_YA_BIT 4 #define MPU6050_PWR2_STBY_ZA_BIT 3 #define MPU6050_PWR2_STBY_XG_BIT 2 #define MPU6050_PWR2_STBY_YG_BIT 1 #define MPU6050_PWR2_STBY_ZG_BIT 0 #define MPU6050_WAKE_FREQ_1P25 0x0 #define MPU6050_WAKE_FREQ_2P5 0x1 #define MPU6050_WAKE_FREQ_5 0x2 #define MPU6050_WAKE_FREQ_10 0x3 #define MPU6050_BANKSEL_PRFTCH_EN_BIT 6 #define MPU6050_BANKSEL_CFG_USER_BANK_BIT 5 #define MPU6050_BANKSEL_MEM_SEL_BIT 4 #define MPU6050_BANKSEL_MEM_SEL_LENGTH 5 #define MPU6050_WHO_AM_I_BIT 6 #define MPU6050_WHO_AM_I_LENGTH 6 #define MPU6050_DMP_MEMORY_BANKS 8 #define MPU6050_DMP_MEMORY_BANK_SIZE 256 #define MPU6050_DMP_MEMORY_CHUNK_SIZE 16 // note: DMP code memory blocks defined at end of header file extern MCU *pACU; class MPU6050 { public: // MPU6050(); MPU6050(I2C_MODULE I2C_MODULE_ID); uint8_t initialize(); uint8_t MPUsetupDMP(); uint8_t MPUsetupRAW(); bool testConnection(); // AUX_VDDIO register uint8_t getAuxVDDIOLevel(); void setAuxVDDIOLevel(uint8_t level); // SMPLRT_DIV register uint8_t getRate(); void setRate(uint8_t rate); // CONFIG register uint8_t getExternalFrameSync(); void setExternalFrameSync(uint8_t sync); uint8_t getDLPFMode(); void setDLPFMode(uint8_t bandwidth); // GYRO_CONFIG register uint8_t getFullScaleGyroRange(); void setFullScaleGyroRange(uint8_t range); // ACCEL_CONFIG register bool getAccelXSelfTest(); void setAccelXSelfTest(bool enabled); bool getAccelYSelfTest(); void setAccelYSelfTest(bool enabled); bool getAccelZSelfTest(); void setAccelZSelfTest(bool enabled); uint8_t getFullScaleAccelRange(); void setFullScaleAccelRange(uint8_t range); uint8_t getDHPFMode(); void setDHPFMode(uint8_t mode); // FF_THR register uint8_t getFreefallDetectionThreshold(); void setFreefallDetectionThreshold(uint8_t threshold); // FF_DUR register uint8_t getFreefallDetectionDuration(); void setFreefallDetectionDuration(uint8_t duration); // MOT_THR register uint8_t getMotionDetectionThreshold(); void setMotionDetectionThreshold(uint8_t threshold); // MOT_DUR register uint8_t getMotionDetectionDuration(); void setMotionDetectionDuration(uint8_t duration); // ZRMOT_THR register uint8_t getZeroMotionDetectionThreshold(); void setZeroMotionDetectionThreshold(uint8_t threshold); // ZRMOT_DUR register uint8_t getZeroMotionDetectionDuration(); void setZeroMotionDetectionDuration(uint8_t duration); // FIFO_EN register bool getTempFIFOEnabled(); void setTempFIFOEnabled(bool enabled); bool getXGyroFIFOEnabled(); void setXGyroFIFOEnabled(bool enabled); bool getYGyroFIFOEnabled(); void setYGyroFIFOEnabled(bool enabled); bool getZGyroFIFOEnabled(); void setZGyroFIFOEnabled(bool enabled); bool getAccelFIFOEnabled(); void setAccelFIFOEnabled(bool enabled); bool getSlave2FIFOEnabled(); void setSlave2FIFOEnabled(bool enabled); bool getSlave1FIFOEnabled(); void setSlave1FIFOEnabled(bool enabled); bool getSlave0FIFOEnabled(); void setSlave0FIFOEnabled(bool enabled); // I2C_MST_CTRL register bool getMultiMasterEnabled(); void setMultiMasterEnabled(bool enabled); bool getWaitForExternalSensorEnabled(); void setWaitForExternalSensorEnabled(bool enabled); bool getSlave3FIFOEnabled(); void setSlave3FIFOEnabled(bool enabled); bool getSlaveReadWriteTransitionEnabled(); void setSlaveReadWriteTransitionEnabled(bool enabled); uint8_t getMasterClockSpeed(); void setMasterClockSpeed(uint8_t speed); // I2C_SLV* registers (Slave 0-3) uint8_t getSlaveAddress(uint8_t num); void setSlaveAddress(uint8_t num, uint8_t address); uint8_t getSlaveRegister(uint8_t num); void setSlaveRegister(uint8_t num, uint8_t reg); bool getSlaveEnabled(uint8_t num); void setSlaveEnabled(uint8_t num, bool enabled); bool getSlaveWordByteSwap(uint8_t num); void setSlaveWordByteSwap(uint8_t num, bool enabled); bool getSlaveWriteMode(uint8_t num); void setSlaveWriteMode(uint8_t num, bool mode); bool getSlaveWordGroupOffset(uint8_t num); void setSlaveWordGroupOffset(uint8_t num, bool enabled); uint8_t getSlaveDataLength(uint8_t num); void setSlaveDataLength(uint8_t num, uint8_t length); // I2C_SLV* registers (Slave 4) uint8_t getSlave4Address(); void setSlave4Address(uint8_t address); uint8_t getSlave4Register(); void setSlave4Register(uint8_t reg); void setSlave4OutputByte(uint8_t data); bool getSlave4Enabled(); void setSlave4Enabled(bool enabled); bool getSlave4InterruptEnabled(); void setSlave4InterruptEnabled(bool enabled); bool getSlave4WriteMode(); void setSlave4WriteMode(bool mode); uint8_t getSlave4MasterDelay(); void setSlave4MasterDelay(uint8_t delay); uint8_t getSlate4InputByte(); // I2C_MST_STATUS register bool getPassthroughStatus(); bool getSlave4IsDone(); bool getLostArbitration(); bool getSlave4Nack(); bool getSlave3Nack(); bool getSlave2Nack(); bool getSlave1Nack(); bool getSlave0Nack(); // INT_PIN_CFG register bool getInterruptMode(); void setInterruptMode(bool mode); bool getInterruptDrive(); void setInterruptDrive(bool drive); bool getInterruptLatch(); void setInterruptLatch(bool latch); bool getInterruptLatchClear(); void setInterruptLatchClear(bool clear); bool getFSyncInterruptLevel(); void setFSyncInterruptLevel(bool level); bool getFSyncInterruptEnabled(); void setFSyncInterruptEnabled(bool enabled); bool getI2CBypassEnabled(); void setI2CBypassEnabled(bool enabled); bool getClockOutputEnabled(); void setClockOutputEnabled(bool enabled); // INT_ENABLE register uint8_t getIntEnabled(); void setIntEnabled(uint8_t enabled); bool getIntFreefallEnabled(); void setIntFreefallEnabled(bool enabled); bool getIntMotionEnabled(); void setIntMotionEnabled(bool enabled); bool getIntZeroMotionEnabled(); void setIntZeroMotionEnabled(bool enabled); bool getIntFIFOBufferOverflowEnabled(); void setIntFIFOBufferOverflowEnabled(bool enabled); bool getIntI2CMasterEnabled(); void setIntI2CMasterEnabled(bool enabled); bool getIntDataReadyEnabled(); void setIntDataReadyEnabled(bool enabled); // INT_STATUS register uint8_t getIntStatus(); bool getIntFreefallStatus(); bool getIntMotionStatus(); bool getIntZeroMotionStatus(); bool getIntFIFOBufferOverflowStatus(); bool getIntI2CMasterStatus(); bool getIntDataReadyStatus(); // ACCEL_*OUT_* registers void getMotion9(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz, int16_t* mx, int16_t* my, int16_t* mz); void getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz); void getAcceleration(int16_t* x, int16_t* y, int16_t* z); int16_t getAccelerationX(); int16_t getAccelerationY(); int16_t getAccelerationZ(); // TEMP_OUT_* registers int16_t getTemperature(); // GYRO_*OUT_* registers void getRotation(int16_t* x, int16_t* y, int16_t* z); int16_t getRotationX(); int16_t getRotationY(); int16_t getRotationZ(); // EXT_SENS_DATA_* registers uint8_t getExternalSensorByte(int position); uint16_t getExternalSensorWord(int position); uint32_t getExternalSensorDWord(int position); // MOT_DETECT_STATUS register bool getXNegMotionDetected(); bool getXPosMotionDetected(); bool getYNegMotionDetected(); bool getYPosMotionDetected(); bool getZNegMotionDetected(); bool getZPosMotionDetected(); bool getZeroMotionDetected(); // I2C_SLV*_DO register void setSlaveOutputByte(uint8_t num, uint8_t data); // I2C_MST_DELAY_CTRL register bool getExternalShadowDelayEnabled(); void setExternalShadowDelayEnabled(bool enabled); bool getSlaveDelayEnabled(uint8_t num); void setSlaveDelayEnabled(uint8_t num, bool enabled); // SIGNAL_PATH_RESET register void resetGyroscopePath(); void resetAccelerometerPath(); void resetTemperaturePath(); // MOT_DETECT_CTRL register uint8_t getAccelerometerPowerOnDelay(); void setAccelerometerPowerOnDelay(uint8_t delay); uint8_t getFreefallDetectionCounterDecrement(); void setFreefallDetectionCounterDecrement(uint8_t decrement); uint8_t getMotionDetectionCounterDecrement(); void setMotionDetectionCounterDecrement(uint8_t decrement); // USER_CTRL register bool getFIFOEnabled(); void setFIFOEnabled(bool enabled); bool getI2CMasterModeEnabled(); void setI2CMasterModeEnabled(bool enabled); void switchSPIEnabled(bool enabled); void resetFIFO(); void resetI2CMaster(); void resetSensors(); // PWR_MGMT_1 register void reset(); bool getSleepEnabled(); void setSleepEnabled(bool enabled); bool getWakeCycleEnabled(); void setWakeCycleEnabled(bool enabled); bool getTempSensorEnabled(); void setTempSensorEnabled(bool enabled); uint8_t getClockSource(); void setClockSource(uint8_t source); // PWR_MGMT_2 register uint8_t getWakeFrequency(); void setWakeFrequency(uint8_t frequency); bool getStandbyXAccelEnabled(); void setStandbyXAccelEnabled(bool enabled); bool getStandbyYAccelEnabled(); void setStandbyYAccelEnabled(bool enabled); bool getStandbyZAccelEnabled(); void setStandbyZAccelEnabled(bool enabled); bool getStandbyXGyroEnabled(); void setStandbyXGyroEnabled(bool enabled); bool getStandbyYGyroEnabled(); void setStandbyYGyroEnabled(bool enabled); bool getStandbyZGyroEnabled(); void setStandbyZGyroEnabled(bool enabled); // FIFO_COUNT_* registers uint16_t getFIFOCount(); // FIFO_R_W register uint8_t getFIFOByte(); void setFIFOByte(uint8_t data); void getFIFOBytes(uint8_t *data, uint8_t length); // WHO_AM_I register uint8_t getDeviceID(); void setDeviceID(uint8_t id); // ======== UNDOCUMENTED/DMP REGISTERS/METHODS ======== // XG_OFFS_TC register uint8_t getOTPBankValid(); void setOTPBankValid(bool enabled); int8_t getXGyroOffsetTC(); void setXGyroOffsetTC(int8_t offset); // YG_OFFS_TC register int8_t getYGyroOffsetTC(); void setYGyroOffsetTC(int8_t offset); // ZG_OFFS_TC register int8_t getZGyroOffsetTC(); void setZGyroOffsetTC(int8_t offset); // X_FINE_GAIN register int8_t getXFineGain(); void setXFineGain(int8_t gain); // Y_FINE_GAIN register int8_t getYFineGain(); void setYFineGain(int8_t gain); // Z_FINE_GAIN register int8_t getZFineGain(); void setZFineGain(int8_t gain); // XA_OFFS_* registers int16_t getXAccelOffset(); void setXAccelOffset(int16_t offset); // YA_OFFS_* register int16_t getYAccelOffset(); void setYAccelOffset(int16_t offset); // ZA_OFFS_* register int16_t getZAccelOffset(); void setZAccelOffset(int16_t offset); // XG_OFFS_USR* registers int16_t getXGyroOffset(); void setXGyroOffset(int16_t offset); // YG_OFFS_USR* register int16_t getYGyroOffset(); void setYGyroOffset(int16_t offset); // ZG_OFFS_USR* register int16_t getZGyroOffset(); void setZGyroOffset(int16_t offset); // INT_ENABLE register (DMP functions) bool getIntPLLReadyEnabled(); void setIntPLLReadyEnabled(bool enabled); bool getIntDMPEnabled(); void setIntDMPEnabled(bool enabled); // DMP_INT_STATUS bool getDMPInt5Status(); bool getDMPInt4Status(); bool getDMPInt3Status(); bool getDMPInt2Status(); bool getDMPInt1Status(); bool getDMPInt0Status(); // INT_STATUS register (DMP functions) bool getIntPLLReadyStatus(); bool getIntDMPStatus(); // USER_CTRL register (DMP functions) bool getDMPEnabled(); void setDMPEnabled(bool enabled); void resetDMP(); // BANK_SEL register void setMemoryBank(uint8_t bank, bool prefetchEnabled=false, bool userBank=false); // MEM_START_ADDR register void setMemoryStartAddress(uint8_t address); // MEM_R_W register uint8_t readMemoryByte(); void writeMemoryByte(uint8_t data); void readMemoryBlock(uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0); bool writeMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0, bool verify=true, bool useProgMem=false); bool writeProgMemoryBlock(const uint8_t *data, uint16_t dataSize, uint8_t bank=0, uint8_t address=0, bool verify=true); bool writeDMPConfigurationSet(const uint8_t *data, uint16_t dataSize, bool useProgMem=false); bool writeProgDMPConfigurationSet(const uint8_t *data, uint16_t dataSize); // DMP_CFG_1 register uint8_t getDMPConfig1(); void setDMPConfig1(uint8_t config); // DMP_CFG_2 register uint8_t getDMPConfig2(); void setDMPConfig2(uint8_t config); // special methods for MotionApps 2.0 implementation // #ifdef MPU6050_INCLUDE_DMP_MOTIONAPPS20 uint8_t *dmpPacketBuffer; uint16_t dmpPacketSize; uint8_t dmpInitialize(); bool dmpPacketAvailable(); uint8_t dmpSetFIFORate(uint8_t fifoRate); uint8_t dmpGetFIFORate(); uint8_t dmpGetSampleStepSizeMS(); uint8_t dmpGetSampleFrequency(); int32_t dmpDecodeTemperature(int8_t tempReg); // Register callbacks after a packet of FIFO data is processed //uint8_t dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority); //uint8_t dmpUnregisterFIFORateProcess(inv_obj_func func); uint8_t dmpRunFIFORateProcesses(); // Setup FIFO for various output uint8_t dmpSendQuaternion(uint_fast16_t accuracy); uint8_t dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendPacketNumber(uint_fast16_t accuracy); uint8_t dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy); uint8_t dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy); // Get Fixed Point data from FIFO uint8_t dmpGetAccel(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetAccel(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetAccel(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetQuaternion(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetQuaternion(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetQuaternion(Quaternion *q, const uint8_t* packet=0); uint8_t dmpGet6AxisQuaternion(int32_t *data, const uint8_t* packet=0); uint8_t dmpGet6AxisQuaternion(int16_t *data, const uint8_t* packet=0); uint8_t dmpGet6AxisQuaternion(Quaternion *q, const uint8_t* packet=0); uint8_t dmpGetRelativeQuaternion(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetRelativeQuaternion(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetRelativeQuaternion(Quaternion *data, const uint8_t* packet=0); uint8_t dmpGetGyro(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetGyro(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetGyro(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpSetLinearAccelFilterCoefficient(float coef); uint8_t dmpGetLinearAccel(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetLinearAccel(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetLinearAccel(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetLinearAccel(VectorInt16 *v, VectorInt16 *vRaw, VectorFloat *gravity); uint8_t dmpGetLinearAccelInWorld(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetLinearAccelInWorld(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetLinearAccelInWorld(VectorInt16 *v, VectorInt16 *vReal, Quaternion *q); uint8_t dmpGetGyroAndAccelSensor(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetGyroAndAccelSensor(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetGyroAndAccelSensor(VectorInt16 *g, VectorInt16 *a, const uint8_t* packet=0); uint8_t dmpGetGyroSensor(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetGyroSensor(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetGyroSensor(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetControlData(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetTemperature(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetGravity(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetGravity(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetGravity(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetGravity(VectorFloat *v, Quaternion *q); uint8_t dmpGetUnquantizedAccel(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetUnquantizedAccel(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetUnquantizedAccel(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetQuantizedAccel(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetQuantizedAccel(int16_t *data, const uint8_t* packet=0); uint8_t dmpGetQuantizedAccel(VectorInt16 *v, const uint8_t* packet=0); uint8_t dmpGetExternalSensorData(int32_t *data, uint16_t size, const uint8_t* packet=0); uint8_t dmpGetEIS(int32_t *data, const uint8_t* packet=0); uint8_t dmpGetEuler(float *data, Quaternion *q); uint8_t dmpGetYawPitchRoll(float *data, Quaternion *q, VectorFloat *gravity); // Get Floating Point data from FIFO uint8_t dmpGetAccelFloat(float *data, const uint8_t* packet=0); uint8_t dmpGetQuaternionFloat(float *data, const uint8_t* packet=0); uint8_t dmpProcessFIFOPacket(const unsigned char *dmpData); uint8_t dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t *processed=_NULL); uint8_t dmpSetFIFOProcessedCallback(void (*func) (void)); uint8_t dmpInitFIFOParam(); uint8_t dmpCloseFIFO(); uint8_t dmpSetGyroDataSource(uint8_t source); uint8_t dmpDecodeQuantizedAccel(); uint32_t dmpGetGyroSumOfSquare(); uint32_t dmpGetAccelSumOfSquare(); void dmpOverrideQuaternion(long *q); uint16_t dmpGetFIFOPacketSize(); private: I2C_MODULE I2C_MODULE_ID; uint8_t devAddr; uint8_t buffer[14]; }; #endif /* _MPU6050_H_ */ MPU6050.cpp : /** Specific address constructor. * @param address I2C address * @see MPU6050_DEFAULT_ADDRESS * @see MPU6050_ADDRESS_AD0_LOW * @see MPU6050_ADDRESS_AD0_HIGH */ MPU6050::MPU6050(I2C_MODULE I2C_MODULE_ID) { MPU6050::devAddr = MPU6050_DEFAULT_ADDRESS; MPU6050::I2C_MODULE_ID = I2C_MODULE_ID; } uint8_t MPU6050::MPUsetupDMP() { // MPU control/status vars // bool dmpReady = false; // set true if DMP init was successful // uint8_t mpuIntStatus; // holds actual interrupt status byte from MPU uint8_t devStatus; // return status after each device operation (0 = success, !0 = error) // uint16_t packetSize; // expected DMP packet size (default is 42 bytes) // uint16_t fifoCount; // count of all bytes currently in FIFO // uint8_t fifoBuffer[64]; // FIFO storage buffer // Quaternion q; // [w, x, y, z] quaternion container MPU6050::initialize(); // verify connection if(MPU6050::testConnection()) pACU->UART1Send("MPU connection OK\n"); else { pACU->UART1Send("MPU connection FAILED\n"); return 0; } // load and configure the DMP pACU->UART1Send("Initializing DMP...\n"); devStatus = MPU6050::dmpInitialize(); // supply your own gyro offsets here, scaled for min sensitivity MPU6050::setXGyroOffset(0); MPU6050::setYGyroOffset(0); MPU6050::setZGyroOffset(0); MPU6050::setZAccelOffset(0); // 1688 factory default for my test chip // make sure it worked (returns 0 if so) if (devStatus == 0) { // turn on the DMP, now that it's ready pACU->UART1Send("Enabling DMP...\n"); MPU6050::setDMPEnabled(true); MPU6050::resetFIFO(); // enable Arduino interrupt detection // Serial.println(F("Enabling interrupt detection (Arduino external interrupt 0)...")); // attachInterrupt(0, dmpDataReady, RISING); // mpuIntStatus = MPU6050::getIntStatus(); // set our DMP Ready flag so the main loop() function knows it's okay to use it // pACU->UART1Send("DMP ready! Waiting for first interrupt...\n"); // dmpReady = true; // get expected DMP packet size for later comparison dmpPacketSize = MPU6050::dmpGetFIFOPacketSize(); } else { // ERROR! // 1 = initial memory load failed // 2 = DMP configuration updates failed // (if it's going to break, usually the code will be 1) char temp[50]={0}; sprintf(temp,"DMP Initialization failed code : %d\n",devStatus); pACU->UART1Send(temp); } pACU->UART1Send("\n\n!!! MPU and DMP INITIALIZATION COMPLETED !!! \n\n"); } uint8_t MPU6050::MPUsetupRAW() { MPU6050::initialize(); // verify connection if(MPU6050::testConnection()) pACU->UART1Send("MPU connection OK\n"); else { pACU->UART1Send("MPU connection FAILED\n"); return 0; } }
  2. Hi everyone, I have been playing with a MPU6050 and an Arduino for a while now and I think it time to replace my Arduino with my new pic32mx. I d like to create a "bridge" in order to use the I2Cdev library on a pic. First of all, if I managed to miss it during my google search, I would love the link If not, well, I m willing to try and build it myself. However I could use some guidelines... I would not say I m a noob in programming but I m certainly not an expert. The way I understand it: All the Class in this library use functions coming from "I2Cdev.cpp/h" "I2Cdev" is using functions coming from "Wire.cpp/h" (I know there is other possibilities but It can work using only the Wire class correct?) Then "Wire" use "twi.cpp/h" (with the TwoWire object created outside of the class ?!? (extern TwoWire Wire;) that's where c++ starts to be a bit confusing for me...) My first (and still main) idea was to create a whole new "Wire.cpp" and to rewrite all its original functions with code appropriate to pic32. But an other option could be to keep the Wire classe from Arduino and rewrite the TWI class instead... The second option would permit to keep the twi class almost intact (with all its benefit) and change only the necessary part. Third option : Anyone ??? What I have today is a class with the following functions (working for my pic) sendStart (bool restart) send a start or a restart signal sendStop() send a stop signal transmitOneByte(char data) just put a byte in the buffer (hardware send it automatically) sendData(char *data, int quantity) // Call sendStart // transmit *data with data[0] = slave address // Call sendStop readData(char *dataTX, int nb param, char *dataRX, int quantity) // Call sendStart // transmit *data with data[0] = slave address, data[1] = register1 , data[2] = register 2 .... // sendStart restart // transmit slave address+write // read the different byte, store them in dataRX and send a Nack at the end // Call sendStop I believe they are close to the Wire class so that should be the easy option however Wire is a daughter class of Stream.h which is daughter of print.h which is daughter......... So the really easy option would be to download that library from a dark website in one of your post below ;-) ;-) ;-) Looking forward to reading you Joachim
×
×
  • Create New...