Jump to content
I2Cdevlib Forums

misiek303

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by misiek303

  1. I just have tried UNO and YUN again. Calibration not working on both. Gotta do something wrong here. A5 -> SCL A4 -> SDA 3.3V GND D2 -> INT Connects just fine with 0x68 address, I have not changed sketch. using 1.1v. Any ideas ? Thanks.
  2. So I am running with the issue from the begining of this thread. I can see just "..." and calibration can't finished. I use Arduino YUN currently and 1.1v of the sketch. I have below outpus of means values.. Send any character to start sketch. MPU6050 Calibration Sketch Your MPU6050 should be placed in horizontal position, with package letters facing up. Don't touch it until you see a finish message. MPU6050 connection successful Reading sensors for first time... Calculating offsets... 6744 713 17482 54 -693 220 -2092 -1526 15153 54 1354 -802 119 710 17488 -969 -1717 1245 116 714 15154 1078 1354 -1826 118 -1524 17488 -969 -693 2270 121 712 15149 1078 330 -2850 121 714 17487 -969 331 3293 117 718 15151 1078 -694 -2850 121 -1527 17485 -969 330 2269 117 713 15149 1078 330 -1826 119 716 17483 -969 -692 1245 117 -1527 15150 1078 330 -801 118 713 17491 -1993 329 221 120 714 17490 2102 -693 221 120 -1523 15153 -1994 330 -802 120 714 17487 2102 330 1245 -2085 713 15151 -1993 -693 -802 120 -1525 17484 2101 330 221 122 712 15154 -1994 330 221 118 714 17491 2102 -693 -802 118 -1522 15150 -1993 1354 1244 119 714 17484 1078 -1717 -1826 117 714 15157 -969 1355 2269 115 -1523 17489 1078 -693 -1826 116 713 15150 -969 330 1245 115 713 17485 1078 -693 -802 118 -1525 15152 -969 1354 221 117 714 17484 1078 -1717 221 117 718 15150 -969 1353 -802 121 713 17484 1078 -693 1245 115 -1525 15149 -1993 330 -802 118 713 17486 2101 -693 221 117 713 17486 -1993 1354 221 118 -1525 15153 2102 -1717 -802 116 713 17485 -1993 1353 1245 -2089 715 15149 2102 -693 -1826 119 -1524 17485 -1993 330 2269 117 714 15152 2102 330 -1826 113 713 17488 -1994 -693 1245 120 -1524 15152 2101 330 -802 117 712 17484 -3017 330 221 116 714 15147 3126 -694 221 119 -1524 17493 -3017 329 -802 120 715 15147 3125 330 1245 120 717 17488 -3018 -694 -802 117 -1527 15154 3126 330 221 116 713 17485 -3017 330 222 117 714 15152 3126 -693 -802 115 -1524 17489 -3017 330 1245 117 717 17486 2102 330 -1826 Any ideas ?
×
×
  • Create New...