Jump to content
I2Cdevlib Forums

Murali21

Members
  • Posts

    2
  • Joined

  • Last visited

  • Days Won

    4

Murali21 last won the day on November 13 2017

Murali21 had the most liked content!

Murali21's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Sir, Im facing the same issue as Winnie!!! my connectons are: GNd to GND Vcc to 3.3 V SDa to A4 SCl to A5...The raw values always read zero and there is a connection failure!!! please help me out.. The sensor is however getting raw data while using the sketch of Free IMU raw....
  2. Sir, I used the MPU 6050 program from Github...its strange that all my a/g values shows zero ....dont know whether its a communication program or problem with my library please help me out as i am new to this. the program i used is: #include "Wire.h" #include "DebugUtils.h" // I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files // for both classes must be in the include path of your project #include "I2Cdev.h" #include "MPU60X0.h" #include <SPI.h> // class default I2C address is 0x68 // specific I2C addresses may be passed as a parameter here // AD0 low = 0x68 (default for InvenSense evaluation board) // AD0 high = 0x69 MPU60X0 accelgyro; int16_t ax, ay, az; int16_t gx, gy, gz; #define LED_PIN 13 bool blinkState = false; void setup() { // join I2C bus (I2Cdev library doesn't do this automatically) Wire.begin(); // initialize serial communication // (38400 chosen because it works as well at 8MHz as it does at 16MHz, but // it's really up to you depending on your project) Serial.begin(38400); // initialize device Serial.println("Initializing I2C devices..."); accelgyro.initialize(); // verify connection Serial.println("Testing device connections..."); Serial.println(accelgyro.testConnection() ? "MPU6050 connection successful" : "MPU6050 connection failed"); // configure Arduino LED for pinMode(LED_PIN, OUTPUT); } void loop() { // read raw accel/gyro measurements from device accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz); // these methods (and a few others) are also available //accelgyro.getAcceleration(&ax, &ay, &az); //accelgyro.getRotation(&gx, &gy, &gz); // display tab-separated accel/gyro x/y/z values Serial.print("a/g:\t"); Serial.print(ax); Serial.print("\t"); Serial.print(ay); Serial.print("\t"); Serial.print(az); Serial.print("\t"); Serial.print(gx); Serial.print("\t"); Serial.print(gy); Serial.print("\t"); Serial.println(gz); // blink LED to indicate activity blinkState = !blinkState; digitalWrite(LED_PIN, blinkState); }
×
×
  • Create New...