Jump to content
I2Cdevlib Forums

riscy00

Members
  • Posts

    1
  • Joined

  • Last visited

riscy00's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Hi I have Gyro device on board attached to stepper motor, doing 360deg spin and capture data (FIFO method). Below is the FIFO results. NB: The 1st row can be ignored since the Gyro is not continous capture mode. ==================================================================Setup FXAS21002 is same as MPU-6050, hence the setting is G_F_SETUP = 0b10100000 // 32 Count and Circular Mode G_INT_SRC_FLAG = 0b00000100 // Select SRC_FIFO as source interrupt G_CTRL_REG2, = 0b11000010 // Enable FIFO interrupt, mapped to INT1 - PTA5, push-pull, active low interrupt G_CTRL_REG1, = 0b00011100 // ODR = 12.5Hz, Standby mode G_CTRL_REG3, = 0b00001000 // WRAPTOONE=1 for FIFO method. G_CTRL_REG0 = 0b00000000 // LPF = 256Hz, HPF disabled, HPF cutoff frequency = N/A, Gain = ±2000 || 62.5 (mdps/LSB) Note the gain is Gain = ±2000 || 62.5 (mdps/LSB) and Sample Rate is 12.5Hz which mean it take 2.56 second for FIFO to be populated and trigger interrupts. Each element of FIFO data is 80mSec capture rate within the IC. ==================================================================Raw Data to Readout for (i=0; i<32; i++) { index = i*6; FXASFIFOData.FXAS_GRYODataRaw.X = ((INT16) I2CrxBuffer[index+0] << 8 | I2CrxBuffer[index+1]); // 1LSB = 0.0078125deg/Sec FXASFIFOData.FXAS_GRYODataRaw.Y = ((INT16) I2CrxBuffer[index+2] << 8 | I2CrxBuffer[index+3]); FXASFIFOData.FXAS_GRYODataRaw.Z = ((INT16) I2CrxBuffer[index+4] << 8 | I2CrxBuffer[index+5]); FXASFIFOData.FXAS_GRYOData.X = (((INT32)FXASFIFOData.FXAS_GRYODataRaw.X *1000) /128); //mDeg/Sec FXASFIFOData.FXAS_GRYOData.Y = (((INT32)FXASFIFOData.FXAS_GRYODataRaw.Y *1000) /128); FXASFIFOData.FXAS_GRYOData.Z = (((INT32)FXASFIFOData.FXAS_GRYODataRaw.Z *1000) /128); //-------------------------------------------------------Sum it up as part of integration. FXASData.iGryoData.X += FXASFIFOData.FXAS_GRYOData.X; FXASData.iGryoData.Y += FXASFIFOData.FXAS_GRYOData.Y; FXASData.iGryoData.Z += FXASFIFOData.FXAS_GRYOData.Z; } ==================================================================FIFO Data ---INFO: FXAS (Gryo) Invoking Capture Process ---INFO: Received FXAS: RIT PREV INT: 820078 || RIT AT INT: 840080 ---INFO: Interrupt Period = 20002 ---------------------------------------------------------------------- ---INFO: FIFO No: 0 | X: 531 | Y: 156 | Z: -453 ---INFO: FIFO No: 1 | X: -54 | Y: -304 | Z: -15 ---INFO: FIFO No: 2 | X: -62 | Y: -296 | Z: -7 ---INFO: FIFO No: 3 | X: -70 | Y: -304 | Z: -7 ---INFO: FIFO No: 4 | X: -85 | Y: -312 | Z: -15 ---INFO: FIFO No: 5 | X: -78 | Y: -304 | Z: -7 ---INFO: FIFO No: 6 | X: 14507 | Y: -304 | Z: 23 ---INFO: FIFO No: 7 | X: 84304 | Y: -335 | Z: 234 ---INFO: FIFO No: 8 | X: 93226 | Y: -304 | Z: 304 ---INFO: FIFO No: 9 | X: 93335 | Y: -359 | Z: 375 ---INFO: FIFO No: 10 | X: 93351 | Y: -492 | Z: 421 ---INFO: FIFO No: 11 | X: 93320 | Y: -484 | Z: 281 ---INFO: FIFO No: 12 | X: 88078 | Y: -390 | Z: 195 ---INFO: FIFO No: 13 | X: 20671 | Y: -437 | Z: 7 ---INFO: FIFO No: 14 | X: -39 | Y: -289 | Z: -15 ---INFO: FIFO No: 15 | X: -78 | Y: -289 | Z: -15 ---INFO: FIFO No: 16 | X: -78 | Y: -304 | Z: -15 ---INFO: FIFO No: 17 | X: -85 | Y: -296 | Z: -15 ---INFO: FIFO No: 18 | X: -93 | Y: -312 | Z: -7 ---INFO: FIFO No: 19 | X: -93 | Y: -304 | Z: -7 ---INFO: FIFO No: 20 | X: -85 | Y: -304 | Z: -7 ---INFO: FIFO No: 21 | X: -85 | Y: -289 | Z: -23 ---INFO: FIFO No: 22 | X: -85 | Y: -296 | Z: -23 ---INFO: FIFO No: 23 | X: -93 | Y: -296 | Z: -15 ---INFO: FIFO No: 24 | X: -78 | Y: -304 | Z: -15 ---INFO: FIFO No: 25 | X: -85 | Y: -304 | Z: -7 ---INFO: FIFO No: 26 | X: -101 | Y: -312 | Z: -15 ---INFO: FIFO No: 27 | X: -93 | Y: -304 | Z: -15 ---INFO: FIFO No: 28 | X: -101 | Y: -304 | Z: -15 ---INFO: FIFO No: 29 | X: -93 | Y: -304 | Z: 0 ---INFO: FIFO No: 30 | X: -93 | Y: -296 | Z: -7 ---INFO: FIFO No: 31 | X: -85 | Y: -296 | Z: -23 ---------------------------------------------------------------------- ---------------------------------------------------------------------- ---INFO: Offset Zero Parameter: X: 0 | Y: 0 | Z: 0 ---INFO: Integrated Results : X: 1097 | Y: 9872 | Z: 579431 ---INFO: Results is represented as mDeg/2.56Sec, Depending on RIT. ==================================================================Motor For 360 spin, I get 579431 readout (sum of 32 FIFO data). As for Motor: I have stepper Motor (full step), operating 2.5mSec/Step and 200 Step. This transulate to 2.5mSec/Step => 60 / (2.5mSec/Step * 200 Step) = 120 rpm or 2 rps. =================================================================Query I trying to figure out what the Gyro really mean in relationship to Motor spin? Should I expect 360deg result? Can anyone offer meaningful interpertation of the results here?
×
×
  • Create New...