473srikanth Posted January 19, 2017 Report Share Posted January 19, 2017 Hello Friends, I am working on designing a drone . i am using gyroscope present in mpu 6050. i configured gyro with 500dps (register 0x1B is loaded with value 0x08 ) and power management register 0x6B is loaded with 0x00(for bringing gyro to on state). I measured the values of gyro x, y and z (16bit values) . How can i convert these values into yaw,pitch ,roll angles ?? My gyro values(after subtracting the gyro offset values) New Gyro Values Xnew=1472 Ynew=-19 Znew=299 values New Gyro Values Xnew=1466 Ynew=-2 Znew=480 values New Gyro Values Xnew=1416 Ynew=-3 Znew=656 values New Gyro Values Xnew=1418 Ynew=-28 Znew=910 values New Gyro Values Xnew=1414 Ynew=-11 Znew=1346 values New Gyro Values Xnew=1408 Ynew=-19 Znew=1413 values New Gyro Values Xnew=1396 Ynew=-9 Znew=1543 values New Gyro Values Xnew=1398 Ynew=-8 Znew=1352 values Thanks in advance …… Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.