Jump to content
I2Cdevlib Forums

Recommended Posts

I have problem with MPU6050. Approximately every 1 - 2 minutes I get the NACK on the I2C bus from the sensor. This situation arises entirely by chance. I receive NACK during read "Current FIFO buffer size" register, but after reading this register again, the device responds normally.
Do not know what could be the reason?
Link to comment
Share on other sites

  • 2 weeks later...

Problem resolved.

The problem was the configuration of the INT pin. MPU6050 for some reason does not respond when it issues a pulse with a duration of 50 us, when DMP data ready. The problem was solved by the INT pin configuration so that the MPU6050 held its pin until the data was read.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...