MKshorts714

hey bro did you get readings like this if I wire ado pin to gnd of mpu6050 then I will get correct reading or not ? I am connecting my mpu6050 with esp32 devkit module and facing this error by using simple basic code these are the reading at first I get correct reading after that reading get incorrect and stuck as you can see at the end pls help me if u can I am a beginner 11:45:59.574 -> Acceleration X: 0.38, Y: -8.55, Z: 5.16 m/s^2 11:45:59.597 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:45:59.605 -> Temperature: 21.02 degC 11:46:00.076 -> Acceleration X: 0.38, Y: -8.54, Z: 5.16 m/s^2 11:46:00.092 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:46:00.094 -> Temperature: 21.00 degC 11:46:00.579 -> Acceleration X: 0.38, Y: -8.55, Z: 5.15 m/s^2 11:46:00.591 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:46:00.593 -> Temperature: 20.99 degC 11:46:01.082 -> Acceleration X: 0.38, Y: -8.55, Z: 5.16 m/s^2 11:46:01.088 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:46:01.091 -> Temperature: 20.96 degC 11:46:01.603 -> Acceleration X: 0.38, Y: -8.55, Z: 5.16 m/s^2 11:46:01.608 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:46:01.612 -> Temperature: 20.96 degC 11:46:02.101 -> Acceleration X: 0.38, Y: -8.55, Z: 5.17 m/s^2 11:46:02.104 -> Rotation X: -0.04, Y: -0.01, Z: 0.01 rad/s 11:46:02.107 -> Temperature: 20.94 degC 11:46:02.599 -> Acceleration X: -15.33, Y: 60.22, Z: 16.55 m/s^2 11:46:02.605 -> Rotation X: -1.30, Y: -3.27, Z: 0.00 rad/s 11:46:02.608 -> Temperature: 36.62 degC 11:46:03.098 -> Acceleration X: -14.10, Y: 60.22, Z: 16.55 m/s^2 11:46:03.100 -> Rotation X: -1.30, Y: -3.27, Z: 0.00 rad/s 11:46:03.103 -> Temperature: 36.62 degC 11:46:03.596 -> Acceleration X: -14.10, Y: 60.22, Z: 16.55 m/s^2 11:46:03.599 -> Rotation X: -1.30, Y: -3.27, Z: 0.00 rad/s 11:46:03.615 -> Temperature: 36.62 degC 11:46:04.095 -> Acceleration X: -14.10, Y: 60.22, Z: 16.55 m/s^2 11:46:04.115 -> Rotation X: -1.30, Y: -3.27, Z: 0.00 rad/s 11:46:04.120 -> Temperature: 36.62 degC