Hello,
I bought MPU6050 Breakout made by Seeed , Called Xadow IMU 6DOF.
They support the product by a basic library HERE which is based on the same code and libraries made by Jeff Rowberg (thanks a lot ), this code gives the ROW data from Accelerometer and Gyro.
When I combined this library with Jeff's one, and I was able to activate the DMP and get YAW readings (which is my only interest) you can see the Library HERE Xadow_MPU6050_DMP6_Test_modified.zip I'm Using a GPS (EM406) and I'm trying to get my longitude and latitude using a NMEA Class, Here GPS_Serial_Test.zip Everything works fine, but When I try to combine these (.ino) like this code Xadow_MPU6050_GPS_Test.zip
the code just freeze ! i.e. I get no data neither from the MPU nor the GPS !!! , The only thing i recieve is this number "1.00" When I delete this line " NMEA gps14(GPRMC); " , the MPU works fine, but of course I recieve no data from the GPS.
I'm Using Arduino UNO R3, and Arduino-1.0.5-R2 IDE
Any Ideas ???
Thanks a lot.
Hello, I bought MPU6050 Breakout made by Seeed , Called Xadow IMU 6DOF. They support the product by a basic library HERE which is based on the same code and libraries made by Jeff Rowberg (thanks a lot ), this code gives the ROW data from Accelerometer and Gyro. When I combined this library with Jeff's one, and I was able to activate the DMP and get YAW readings (which is my only interest) you can see the Library HERE Xadow_MPU6050_DMP6_Test_modified.zip I'm Using a GPS (EM406) and I'm trying to get my longitude and latitude using a NMEA Class, Here GPS_Serial_Test.zip Everything works fine, but When I try to combine these (.ino) like this code Xadow_MPU6050_GPS_Test.zip the code just freeze ! i.e. I get no data neither from the MPU nor the GPS !!! , The only thing i recieve is this number "1.00" When I delete this line " NMEA gps14(GPRMC); " , the MPU works fine, but of course I recieve no data from the GPS. I'm Using Arduino UNO R3, and Arduino-1.0.5-R2 IDE Any Ideas ??? Thanks a lot.